Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AUDIOVOX K-9. We hope that this AUDIOVOX K-9 user guide will be useful to you.
Lastmanuals help download the user guide AUDIOVOX K-9.
Detailed instructions for use are in the User's Guide.
[. . . ] ASA Electronics TV/VCP Floor Console Model K-9 With out Harness and Antenna
12 Volt DC powered remote controlled 9" television AVT-975 12 Volt DC powered remote controlled VHS Video Cassette Player AVP-7000 Installation Instructions
Audiovox Specialized Applications, LLC 23319 Cooper Drive Elkhart IN 46514 1 (219) 264-3135 www. audiovox. com
Page 1 of 10 P/N 8007132 REV. B BJ
This manual contains specific instructions on how to install this automotive TV/VCP floor console. Please read this manual thoroughly before installing the console into the vehicle.
**WARNING**
In order to maintain a safe mounting system, this console MUST be secured to the floor of the vehicle according to the instructions contained in this manual. [. . . ] B
1) Attach both straps and customer-supplied harness, securing harness as needed.
P/N 8007132 Page 6 of 10 Rev. B
Step #3 INSTALL CONSOLE TO FLOOR OF VEHICLE
BEFORE DRILLING ANY HOLES VERIFY THAT DRILL BIT WILL NOT ENTER INTO FRAME RAIL(S) OF VEHICLE, ELECTRICAL WIRES, FUEL LINES, BRAKE LINES, HOSES, EXHAUST SYSTEMS OR ANY OTHER ITEMS THAT WILL IMPAIR OPERATION OF VEHICLE. THE BOLTS OF THE FLOOR CONSOLE MUST SECURE TO FLOOR PANEL OF VEHICLE. CLIMB UNDER VEHICLE AND LOOK TO VERIFY THAT HOLES WILL BE IN PROPER LOCATIONS. Set console on floor of vehicle and mark where holes are to be drilled. Drill small 1/8" pilot holes to verify that drill holes are in proper locations. After verifying that 1/8" pilot holes are in proper locations, use ¼ drill bit to " enlarge 1/8" pilot holes. Place bolts through feet of console and into holes previously drilled. Place one large fender washer over each of bolts and attach nuts. Have second person inside vehicle hold bolts securely with box-end wrench while person underneath vehicle tightens down nuts.
P/N 8007132 Page 7 of 10 Rev. B
STEP #4 INSTALL VCP INTO CONSOLE
Remove VCP from box. Connect white RCA connector (customer supplied) from console wiring harness to white audio output jack of VCP. Connect yellow RCA connector (customer supplied) from console wiring harness to yellow audio output jack of VCP. Connect DC power connector (customer supplied) from console to DC power jack of VCP. [. . . ] Make absolutely certain that straps are tight.
P/N 8007132 Page 9 of 10 Rev. B
STEP #6 REPLACE THE FACE OF THE CONSOLE
Place face of console over body of console. Install four Phillips screws that hold the face to the body.
P/N 8007132 Page 10 of 10 Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AUDIOVOX K-9
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AUDIOVOX K-9 will begin.
