User manual AUDIOVOX LCM 972TS

[. . . ] LCM972TS 7" Rearzone Touch Screen Monitor for: VME 9122 TS VME 9512 TS VME 9312 TS 12 Precaution Accessories Main Features Discription for keys Diagramm for connections Basis operations Parameters adjust Warranty Card 14 15 15 16 17 18 21 46 13 Precaution Warning: 1. Only connect the unit to a 12-volt power supply with negative grounding Warning: 2. [. . . ] Touching the red icon of speaker to release MUTE function. Mute function is released automatically if you adjust the volume under mute mode. Volume adjust Under play mode, pressing the [ ] [ ] key to adjust the volume step by step; pressing and holding the [ ] [ ] key to adjust the volume continuously. Volume icon is displayed when you touch the display bottom area. Touching the volume bar briefly to adjust the volume step by step; touching and holding to adjust the volume continuously. 18 Subject to technical changes PARAMETERS ADJUST You can adjust the parameters according to the environment and your interest to get the best display effect. Enter Main Menu · To enter menu mode, press the [SOURCE/MENU] key or touch the top area of the display. The main menu will be displayed as follows: Enter Main Menu · Under main menu mode, pressing and holding the [SOURCE/MENU] key or touching the exit option or stopping operation for some seconds to exit main menu mode. Enter Sub-Menu You can enter sub-menu by following methods under the main menu: · Touch the option you want to set directly (Need touch screen function to support). · Press the [ ] [ ] key to select the option you want to set and then press the [SOURCE/MENU] key to confirm 19 Subject to technical changes PARAMETERS ADJUST Parameter items are displayed after entering a sub-menu. You can adjust the values by touching, (Need touch screen function to support. ) or using the keys on the panel as well. The steps will be followings when you do the operation by pressing the keys on the panel: Pressing the [ ] [ ] key to select one item; Pressing the [SOURCE/MENU] key to confirm; Pressing the [ ] [ ] key to adjust the value. Pressing the [SOURCE/MENU] key to exit current item; Adjust values PICTURE The following menu will be displayed after entering the 'PICTURE' option: You can adjust the values of brightness and contrast according to the environment and your interest. Note: Brightness adjustment is useless when Dimmer is set to 'On' Subject to technical changes 20 PARAMETERS ADJUST FUNCTION The following menu will be displayed after entering the 'FUNCTION' option: (1)BLUE SCREEN The background is blue screen when this option is set to ON . The background is black screen when this option is set to OFF . [. . . ] Then you have the opportunity to control i. e. fully the rearzone by using the TS Monitor of the LCM 972 TS. PARAMETERS Rating operation Voltage: Maximum operation current: Operation temperature: Storage temperature: Display resolution: Brightness: Video input amplitude: Audio input amplitude: Audio amplitude response: Audio S/N: T. H. D: Headphone output impedance: Headphone output power: 12V (Negative Grounding system) 1A -10°C ~ +60°C -20°C ~ +70°C 1440x234 "e300 cd/m2 (brightness of the center area after turning on for 30 minutes) 1Vp-p (75Ohms input impedance) 1Vrms ±3 dB100Hz-20kHz "e50dB "d1% 32 Ohms 0. 125W 22 Subject to technical changes [. . . ]