User manual AUDIOVOX MCD5112

[. . . ] Memory/Battery Connect to battery or 12 volt power source that is always alive. The radio will not work if this wire is not connected. Fuses When replacing a fuse, make sure new fuse is correct type and amperage. [. . . ] Press and hold DISP button for three seconds until clock display flashes, then release. Audible Beep Press SEL for three seconds to turn beep on or off. Press AS/PS while a disc is playing and display will shift from track display to show the time remaining on the track. Use a pencil tip (or other non-metallic object) to press the RESET button. Locking screw can be installed if detachable faceplate is not desired. To reinstall, lock faceplate tray into upright position, position right end of faceplate in stereo and press into place on left end of faceplate. Press << or >> for more than three seconds to select manual tuning mode. 5 seconds after any button is pressed "MAN" will expire and revert to SEEK tuning. Seek Tuning Press << or >> for less than one second to seek next station. Automatically Store Stations Select 10 strong stations and store them in the current band. Hold AS/PS button for more than three seconds. The new stations replace stations already stored in that band. Band Press BAND button to change radio between three FM bands and two AM bands. Radio pauses for five seconds at each station. Press AS/PS again to stop scanning when desired station is reached. Radio pauses for five seconds at each strong station. Do not expose CD player to extremely high or low temperatures. ⷠDo not drive with ejected CD in the slot. [. . . ] Press MEM for more than 3 seconds while in programmed play to clear programming. CD play resumes after button is released. Direct Track Access Select track number by pressing numbered keys (1 ­ 0). [. . . ]