User manual AUDIOVOX MM850 Operation Manual

[. . . ] OSD (On Screen Display) for Control of Picture Quality and Functions !Infrared Transmitter for Optional IR Wireless Headphones !Dome Lights with Built-in Three Way Switch ! [. . . ] Remember to turn the unit OFF and pivot the LCD to the locked position when not in use. Power ON/OFF Switch 6 MM850 1287264. P65 6 11/2/2004, 9:48 AM OPERATION OVERHEAD DOME LIGHTS The Dome Lights integrated into the MM850 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Do not leave the vehicle unattended with the dome light switch in the ON position as this could result in a discharged battery. Consult the Installation Manual for dome light wiring information. Dome Light Switch MM850 7 1287264. P65 7 11/2/2004, 9:48 AM REMOTE CONTROL SENSOR The MM850 incorporates an infrared sensor that will relay signals from the remote control to allow a source connected to the AV1 input to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of source equipment such as a Video Cassette Player or DVD Player. The infrared sensor can relay signals from most manufacturer's remote controls to the component connected to the AV1 input, such as a DVD player. In this case you must use the remote control supplied with the DVD player. Infrared Transmitter Remote Sensor Eye 8 MM850 1287264. P65 8 11/2/2004, 9:48 AM REMOTE CONTROL UNIT BUTTONS CONTROLS 2 1 LCD 4 5 7 10 MENU/ ENTER PLAY 1 2 3 4 5 6 7 8 9 10 REW VCP LCD : Power On / Off Button for the MM850 monitor 3 VCP : Power On / Off Button for an Optional Audiovox VCP 6 SOURCE : Button for selection of AV1 and AUX MENU/ENTER Button 8 ­ : Select Down Button 9 + : Select Up Button REW : . . . . . . . . Rewinds Tape FWD : . . . . . . . . Fast Forwards Tape STOP : . . . . . . . . Stops Tape PLAY : . . . . . . . . Plays Tape SOURCE FWD STOP MM850 9 1287264. P65 9 11/2/2004, 9:48 AM PICTURE ADJUSTMENT When watching the program, the quality of the picture can be adjusted to your preference. BRIGHTNESS 32 Press the MENU button, the main menu 32 CONTRAST MENU 32 COLOR PICTURE will appear. Then press the UP or DOWN 00 TINT SOURCE RESET DISPLAY OFF button to select from picture, source or 32 BRIGHTNESS display off. Press the MENU button again to select the item. For example: Press the MENU button, highlight PICTURE using the UP or DOWN buttons. Press the MENU button to enter the picture adjustment menu. The PICTURE menu will appear, highlight the item you want to adjust using the UP or DOWN buttons and press the MENU button to enter. Then press the UP or DOWN button to adjust the selected item. PICTURE Description of Adjustment Items:Item Press DOWN button To darken the picture BRIGHTNESS CONTRAST COLOR TINT Decrease the contrast for soft color To decrease the color intensity Press UP button To brighten the picture Increases the picture contrast for vivid color To increase the color intensity Increase the greenish Inceases the redish skin skin tones tones To restore the factory settings, select RESET and press the UP or DOWN button. All of the picture adjustments (BRIGHTNESS, CONTRAST, COLOR and TINT) will return to the factory settings. [. . . ] When there is No Picture · · · Check that the signal source is connected. Check that AV1/AUX is selected correctly. Check that the signal source is turned on. 2. [. . . ]