User manual AUDIOVOX MMD70

[. . . ] Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. [. . . ] Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Do not leave the vehicle unattended with the dome light switch in the ON position, as this could result in a discharged battery. Refer to the Installation Guide for wiring information). PLAY PO W ER STO P EJEC T OF F ON O N OF F AU TO P OW E R DO M E LIGH T Dome Light Switch 11 REMOTESENSOR The MMDV7OC / MMDV7OC B incorporates an Infrared sensor which relays signals from the remote control to allow the source connected to AV2 to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as a Video Cassette Player. The infrared sensor can relay signals from most manufacturer's remote control to its respective component connected to the Video 2 input. In this case you must use the remote control supplied with the component. Remote Sensor Eye PLAY PO W ER STO P EJEC T DVD Remote Sensor The MMDV7OC / MMDV7OC B incorporate an Infrared sensor which relays signal from the MMDV7OC / MMDV7OC B remote control that allow the internal DVD player to be controlled by simply by pointing the remote control at the remote sensor eye. Infrared Transmitter OFF ON ON OFF AUTO Remote Sensor Eye POW ER D O M E LIG H T 12 PICTURE ADJUSTMENT When watching the program, the quality of the picture can be adjusted to suit your taste. Press the MENU button, the main menu PICTURE BRIGHTNESS 32 will appear. Then press the DOWN/UP 32 CONTRAST MENU 32 COLOR PICTURE button to select the item you want to adjust. 00 TINT SOURCE RESET DISPLAY OFF Press the MENU button again to select the 32 BRIGHTNESS item. For example: Press MENU button, highlight PICTURE and press the MENU button to enter. If the codes don't match, the disc won't play. Other regional codes cannot be played in this unit. Press and then use the ( ) buttons to select the desired language. The user can select either English, French or Spanish for the OSD language. Defaults Settings Press the SETUP button and select Defaults. The DEFAULTS SETUP allows you to reset ALL options to factory defaults. Press and then press Enter to implement the reset. 21 Settings for Parental (Parental Control) This section of the SETUP Menu allows user to control the content of movie playback from G to ADULT. The Parental Control function allows you to limit viewing to your preference. Use the buttons to select G (Children) PG PG 13 R NC-17 ADULT (Adult) Note:The lower the value, the more strict the limitation. Press the Enter button to confirm the selection. Input a password in 4 digits using the numeric buttons then press the Enter button. The Default password is 3308. 22 Settings for Password (Parental Control Password) Press the SETUP button and select PASSWORD. The PASSWORD SETUP and then press allows you to change the parental control password. [. . . ] · Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. This DVD is Region Number 1. Disc won't play · The disc is dirty. Play starts, but then stops · Condensation has formed. [. . . ]