User manual AUDIOVOX MMDV70CB Operation Manual

[. . . ] MMDV7OC / MMDV7OC B 7" LCD OVERHEAD MONITOR WITH DVD PLAYER P LAY P O W ER S TO P E JE C T O FF ON O N O F F A U TO P O W ER D O M E LI HT G OPERATION MANUAL IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in `park' or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied, must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video system. [. . . ] Description of Adjustment Items:Item Press DOWN button Press UP button BRIGHTNESS CONTRAST COLOR TINT To darken the picture Decrease the contrast for soft color To decrease the color intensity Increases the greenish skin tones To brighten the picture Increase picture contrast for vivid color To increase the color intensity Increases the reddish skin tones To restore the factory settings, select RESET and press either the UP or DOWN button. All of the picture settings (BRIGHTNESS, CONTRAST, COLOR and TINT) will return to the factory preset settings. 13 SOURCE SELECT There are 2 inputs to select from the SOURCE Select Menu: AV1 and AV2. To select the source, highlight SOURCE and press MENU button to enter. Then, press UP / DOWN button to select AV1 or AV2. MENU PICTURE SOURCE DISPLAY OFF SOURCE AV1 AV2 NOTE : The built in DVD player is source "AV1". To play the internal DVD source, press the MENU button to select SOURCE SELECT. Press UP/DOWN until "AV1" is displayed on the screen (below). The MMDV7OC is now ready to play the audio and video signal from the internal DVD player. EXIT THE MENU To exit the main menu, highlight DISPLAY OFF and press MENU button to enter, the menu will disappear. NOTE: The menu also disappears from the screen automatically if you do not press any button within few seconds. 14 WIRELESS HEADPHONES The MMDV7OC / MMDV7OC B includes a built-in infrared transmitter and two pairs of Audiovox wireless headphones (Part Number MMIRHS). · Audio discs ­ Audio CDs that contain musical or sound content only. · MP3 discs ­ A disc that contains audio files (for example, a CD-R with downloaded MP3 files). Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Note: the following Discs CANNOT be used with this player : · MiniDisc · Laserdisc · CD-I, CD-ROM, DVD-ROM To load and Play a Disc When you press the Power button the unit will turn on and display the source selected. Select DVD mode (AV1 mode) and insert the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin. 18 Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup display, you can do the initial setup and set the various outputs. You can also set a language for the on-screen display and the setup display and limit playback by children. 1) Press the SETUP button to display the "setup menu" on the TV screen. 2) Select the main item you want using the cursor ( press the ENTER button. To Cancel Using the Setup Display Press the SETUP button on the remote. ) buttons, and then 19 Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the ( )buttons to select the appropriate settings. 4 3/P :S This displays the wide picture on the screen with a portion of the left & right side removed. [. . . ] Allow immediately player to dry out. 27 TROUBLESHOOTING PROBLEM No sound or distorted sound SOLUTION · Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. · If you are using the IR headphones, make sure you turn on the IR power. · Make sure the Modulator is ON and the proper Frequency has been selected. Can't advance through a movie · You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. [. . . ]