User manual AUDIOVOX MS1400GFM

[. . . ] 8. Test for correct operation, then slide the MS1400GFM fully into the mounting sleeve. 1 WIRING DIAGRAM CONTROL LOCATIONS ¶Â Tune/Track Down ¶ÊPower ¶ÁVolume Up ¶ËMode ¶ÈLCD Display ¶Í EQ ¶Î Auto Store/Preset Scan ¶Ï Eject ¶Ì Mute ¶ÓAudio Selector ¶ÔVolume Down ¶ Tune/Track Up ¶ÒBand/Loudness ¶ÚPreset 1/CD Pause ¶ÛPreset 2/CD Scan ¶ÙPreset 3/CD Repeat ¶i Preset 4/CD Shuffle ¶^ Preset 5 ¶~ Preset 6 ¶¯ Reset The MS1400GFM is designed to not require a constant voltage supply to maintain station memories or operational settings. Do not connect to a voltage source which is constantly hot to prevent draining the battery. 2 3 BASIC OPERATION Power (PWR) ¶Ê Press PWR or any other button (except EJECT) to turn the unit on. Inserting a CD will turn the unit on automatically. LCD Panel ¶È The Liquid Crystal Display (LCD) panel displays the frequency and all activated functions. [. . . ] Press the volume buttons up or down to adjust Bass from -10 to +10. "BAS 00" represents flat response. The bass level will be shown on the display for five seconds or until another function is activated. Treble 1. Press SEL three times until "TRB" appears in the display. 2. Press the volume buttons up or down to adjust Treble from -10 to +10. "TRB 00" represents flat response. The treble level will be shown on the display for five seconds or until another function is activated. Balance 1. Press SEL four times until "BAL" appears in the display. 2. Press volume buttons up (right) or down (left) to adjust Balance between the right and leftspeakers from BAL 10R to BAL 10L. "BALL=R" represents an equal balance level between the right and left speakers. The balance position will be shown on the display for five seconds or until another function is activated. Fader 1. Press SEL five times until "FAD" appears in the display. 2. Press volume buttons up (front) or down (rear) to adjust Fader between the front and rear speakers from FAD 10F to FAD 10R. "FAD F=R" represents an equal balance between the front and rear speakers. 4 5 RADIO OPERATION Seek Tuning ¶Â¶ Press the up or down tuning button momentarily to seek the next strong station in the current band. Press the up or down tuning buttons for more than two seconds to select manual tuning mode. "MANUAL" will appear momentarily on the display. 2. Press the up or down tuning buttons momentarily to move radio frequency up or down one step at a time. 3. Press and hold the up or down tuning buttons to quickly advance to a certain frequency. Release when the desired frequency is reached. If manual tuning is not adjusted for five seconds, the unit will return to Seek tuning mode. "AUTO" will appear momentarily on the display. Band ¶Ò Press BAND to change during radio play to switch between three FM bands and one AM band. [. . . ] The scan function will also be canceled by activating the repeat or shuffle functions. Repeat (RPT) ¶Ù Press RPT during disc play to continuously repeat the selected track. "S--RPT" will appear in the display for five seconds. Press RPT again to stop repeating, and regular play will resume. [. . . ]