User manual AUDIOVOX MSR3007

[. . . ] MSR3007 MARINE AUDIO SYSTEM Installation and Operation Manual POWER MSR3007 VOLUME EQ IX BASS AUDIO MENU MODE CAT SEL CAT + INFO SCROLL TUNE/TRK SEEK SEEK TUNE/TRK VOLUME BAND 40W x 4 SEARCH AUX IN MUTE 1 2 INT 3 RPT 4 RDM 5 6 AS/PS MSR3007 SAFETY INFORMATION When Boating Keep the volume level Iow enough to be aware of your surroundings. Protect from Water Do not expose the product directly to water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Give the interior a chance to cool down before starting playback. [. . . ] VOL PGM (0 ­ 46): Select an automatic turn-on volume. BEEP TONE (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are selected). NOTE: Beep tone off will not affect LOW BATT audible tone. RESUME: Return the EEPROM to factory default set up values and reset the Sirius Tuner Settings. "Yes" will blink on the LCD to confirm. Press MODE to select. Mute Press the MUTE button (17) on the control panel to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include Tuner, SIRIUS, CD, iPod and AUX In (optional Auxiliary Input). NOTE: CD, CDC, IPOD, or SIRIUS mode will be skipped if the module is not installed. The following items can be adjusted: · · · · · · · Reset The reset button should be activated for the following reasons: · · initial installation of the unit when all wiring is completed function buttons do not operate 5 MSR3007 LOW BATTERY Operation If LOW BATT is set to "ON", a alarm will sound (8 beeps every 30 sec) when the voltage drops to 10. 8V (+/- 0. 03V). A visual warning (LOBA) will appear flashing (8 flashes every 30 sec) in the lower left corner of the LCD display. NOTE: "OFF" is the default setting for LOW BATT. Store a Station Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear in the display. Recall a Station Select a band (if needed). Press a preset button (5-10) to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) Automatically Store Select a band (if needed). Press and hold the AS/PS (15) button for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. NOTE: During Auto Store (AS), the tuner will default to "Local" mode while scanning the band initially. After scanning the entire band once, the unit will switch to "Distant" mode for all subsequent Auto Store tuning. 7 MSR3007 CD PLAYER OPERATION 1 POWER 4 24 23 12 11 3 22 2a 13 2b MUTE CAT MSR3007 VOLUME EQ IX BASS AUDIO MENU MODE SEL CAT + INFO SCROLL TUNE/TRK SEEK SEEK TUNE/TRK 21 20 VOLUME BAND 40W x 4 SEARCH AUX IN 1 2 INT 3 RPT 4 RDM 5 6 AS/PS 17 18 14 8 6 5 7 9 10 16 15 19 Inserting and Ejecting a Disc Insert a disc, label-side up, into the disc slot (24) with the unit turned on. The unit will automatically draw the disc in and play the first track on the disc. Press the eject button (22) to stop disc play and eject the disc. [. . . ] Remove the disc in the player and insert the new one. Insert the compact disc with the label facing upward. Clean the disc or try to play a new one. Leave the player off for an hour or so, then try again. [. . . ]