User manual AUDIOVOX MSR4050G

[. . . ] Before you begin, turn off the vehicle ignition and disconnect the battery negative terminal. Remove the two screws from the top of the unit, and seal the holes with the plastic film provided to ensure that no water is able to enter the unit. Push tabs out to secure half-sleeve in the radio opening. Install support strap to make unit more stable. [. . . ] While in Sirius mode, navigate the three options in the user-preset channel group by momentarily pressing BAND/ENTER (18). Press AS/PS (19) to search for each user preset channel from SR1 to SR2 to SR3 and stop at each available channel for five seconds. Momentarily press CHANNEL << (20a) or CHANNEL >> (20b) to move to the previous or next channel. To store favorite channels for quick access, select the desired channel, then press and hold the desired preset button (1-10) (21) for more than three seconds until the corresponding number appears in the display. While in Sirius satellite radio mode, press S-MOD (22a) (also the SHIFT/SCAN button) to select from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the Category or Set Skip Channel modes are selected, the corresponding icon appears in the display. To search the available music categories, access category mode and press CATEGORY (22b) or CATEGORY (22c) to scroll through the available category options. When the desired category is found, search for a specific channel by momentarily pressing CHANNEL << or CHANNEL >>. When the desired channel is found, press BAND/ENTER to access the channel. When direct tune mode is accessed, "000" will appear in the display with the digit representing the "hundreds" value flashing. Press BAND/ENTER to access the station, or the unit will search automatically after several seconds. Display the 12-digit Sirius ID number by pressing BAND/ENTER immediately after entering Direct Tune mode (while "000" appears in the display). press DISP (22d) to scroll through the display. To resume normal operation, press any button except DISP. When the desired channel is found, press BAND/ENTER to confirm and the "SKIP" icon will flash in the display. Use the same process to release a channel that is currently skipped. When finished, press S-MOD to return to normal mode, or the unit will automatically revert to normal in 10 seconds. Note: While skipped channels will be skipped during channel searches, they can be accessed during channel selection by pressing CHANNEL << or CHANNEL >>. Press CHANNEL << (25a) or CHANNEL >> (25b) momentarily to advance to the next or previous track on the CD. the selected track number will appear on the display. Press and hold CHANNEL << or CHANNEL >> to fast forward or fast reverse through the disc. CD play starts when the button is released. [. . . ] AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor. After the initial 90 day period and for a period of 12 months from the date of the original purchase, the Company will supply at no charge a replacement for any defective part(s). To obtain repair or replacement within the terms of this warranty, the end user should contact the O. Dated bill of sale, and serial number of the unit, and vin#), specification of defect(s), transportation prepaid, to an approved warranty station. [. . . ]