User manual AUDIOVOX MVX405

[. . . ] In order to take advantage of these special, enhanced services, you must subscribe to them through your home cellular service provider. The Audiovox MVX405 Series is packed with advanced features that provide the ultimate in convenience and safety like one touch emergency dialing, a constant signal strength and battery life indicator, a voice mail access key and the most advanced anti-fraud security features in the industry. It also features a multi-function access key that allows for simplified storing and recalling of numbers in memory. For ease of operation, the MVX405 Series has been designed with a feature menu printed directly on the keypad. [. . . ] more than a second, Go back to step 2, and repeat the same procedures until the complete character name is displayed. momentarily to erase the last character. If you press all characters on the readout will be erased. If the next letter or number is assigned on the other key (not same key), you can display the next letter or number without pressing . You must enter the phone umber first, then apply the name. Entering a number after applying the name will erase its name. Automatic Answering With this feature on, incoming calls will be automatically answered after two alert tones, and the " light on the readout. Then the unit is ready for conversation. To activate this mode, press and then key . "A-ANS ON" will appear on the readout. " indicator will 2. This mode is deactivated when seconds. and then key are pressed again. As your call is being processed, the word "SEND PIN" will appear in the display. 2. Press the key again, your call will then be sent digitally to the cell site. After you hear the signal from the "Voice Mail Access" key again. The second number in memory address 42 is sent Operating Office, press with DTMF tones. You will monitor the tones through the loudspeaker. The third through fifth number in memory address 43 through 45 can be accessed sequentially in the same manner as above. To Place a Call with a Number in the Memory 1. Press , then enter the memory address (01 through 30). The last 10 digits of the number will appear on the readout. If the number is longer than 10 digits, press hold down the second digit of the memory address. The , then enter the first digit of the memory address, then indicator will light as the call is placed. Speed Dialing This feature permits you to place a call from the stored memory locations without using the recall dialing is a quick method of placing calls from memory. Enter the one or two digits of memory address (1 through 9 and 10 through 30). [. . . ] If you do not answer the Call (by pressing the "SEND" key) the Calling Number is stored in the phone's Memory Stack. The Memory Stack can store up to three Calling Numbers for your retrieval and later use. To conserve memory, if consecutive calls are received from the same number, that number is stored only once. When information such as "Voice Mail" or "Caller ID" is stored in the memory stack, the " " icon at the lower right of the display, flashes. [. . . ]