User manual AUDIOVOX P15 Owners Manual

[. . . ] The indication "AM1", "AM2", "FM1", "FM2", or "FM3" will appear on the display panel according to your selection. 5 9 PRE-SET SCAN TUNING (PS) AUTO-STORE TUNING (AS) During radio operation, press this button momentarily to scan the 6 stations pre-set into the memories of the band in use. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station (the pre-set number on the display panel will flash during Pre-Set Scan operation). Press the button again momentarily to stop the Pre-Set Scan operation and remain on the selected frequency. [. . . ] NOTE: Never leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism of the unit. Always press the eject button and remove the cassette before leaving the vehicle. An auxiliary input jack is provided on the rear of this unit to accept the audio from an additional source such as a portable CD player. Connect the audio output from the source unit to the cable at the rear of the chassis using an appropriate audio patch cable (available at most radio supply stores). To select play of the source connected to the input jack, press the CD/Auxiliary Input Selector button. The indication "Cd" will appear on the display panel and the input connected to the unit will now operate through the audio system of the radio. Use the volume, balance and tone controls of the radio to adjust the sound as desired. QUID CRYSTAL DISPLAYPANEL The Liquid Crystal Display (LCD) panel displays the frequency, time and activated functions. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions and the visibility of the numbers on the display may decrease. The LCD read-out will return to normal when the temperature increases to a normal range. bmLI bpCD/AUXILIARYINPUTSELECTOR(CD) bnCASSETTEDOORthe exposed tape edge to the right, and Hold the cassette with insert into the tape door. Depress fully until the cassette is engaged and begins playing. When the cassette reaches the end of play, the unit will automatically change over to radio operation. -3- bqTIME/FREQUENCYSELECTOR(T/F) press this button to During radio or CD/Auxiliary Input operation, call the time display on the incorporated quartz clock. Pressing the button again or activating any tuning function (during radio operation) will return to frequency or "Cd" display. During tape operation, the time display will always be shown. SETTING THE CLOCK 1. Switch the vehicle ignition "on" and radio "off" (time display will show on the LCD panel). Press and hold the Time/Frequency Selector (T/F) button. At the same time, turn the Manual Tuning Control to the left to adjust the hours (including "AM" or "PM" indication) or to the right to adjust the minutes. 6 bq 3. [. . . ] ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. [. . . ]