User manual AUDIOVOX PPC-6700

[. . . ] Sprint PCS Vision Smart Device PPC-6700 SM www. sprint. com © 2005 Sprint Nextel. No reproduction in whole or in part without prior written approval. Sprint, the "Going Forward" logo, the NEXTEL name and logo, and other trademarks are trademarks of Sprint Nextel. Printed in the U. S. A. Welcome to Sprint We are committed to bringing you the best wireless technology available. [. . . ] Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. Tap OK. To add an extra layer of security while beaming information with other devices, or to set up Bluetooth synchronization, tap Start > Settings > System tab > Bluetooth Setting. Note: Bluetooth Modes Bluetooth on your Sprint PCS Vision Smart Device operates in three different modes: On. Bluetooth is turned on and you can use Bluetooth features. In this mode, you can neither send nor receive information using Bluetooth. You might want to turn the phone off at times in order to conserve battery power, or in situations where phone use is prohibited, such as onboard an aircraft and in hospitals. Bluetooth is turned on, and all other Bluetoothenabled devices within a range of 10 meters can detect your device. Note: By default, Bluetooth is turned off. If you turn it on, and then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. To make your PPC-6700 discoverable: 1. On your device, tap Start > Settings > Connections tab > Bluetooth. Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. 78 Section 6: Getting Connected Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your PPC-6700 and another Bluetooth-enabled device in order to exchange information in a secure manner. Creating a partnership between two devices involves entering the same personal identification number (PIN) on both devices. Creating a partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a PIN again. Make sure the two devices are within a range of 10 meters from one another, and Bluetooth is turned on and in discoverable mode. To create a Bluetooth partnership: 1. On your PPC-6700, tap Start > Settings > Connections tab > Bluetooth. On the Devices tab, tap New Partnership. Your PPC-6700 will search for other Bluetooth devices and displays them in the box. Enter a passkey to establish a secure connection. The passkey must be between 1 and 16 characters. Enter the same passkey on the other device. You can, however, edit and enter a new name for the other device. [. . . ] These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U. S. and international standards bodies: American National Standards Institute (ANSI) IEEE. National Council on Radiation Protection and Measurement (NCRP). [. . . ]