User manual AUDIOVOX VE926

[. . . ] VE926 UNDER THE COUNTER 9" TV, AM/FM RADIO, TELEPHONE & DVD PLAYER OWNER'S and INSTALL MANUAL · · · · · · · · · Slot-in DVD Player & 9" TFT LCD Monitor Multi-function Remote Control Built-in Hands Free Speaker Phone Cable Ready 125 Channel TV Tuner AM/FM Radio 2 A/V Inputs Intercom Ready Internal Stereo Speakers Under Cabinet / Table Top Mounting 0 INTRODUCTION WARNING ­ To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol alerts the user to the fact that exposed "dangerous voltages" reside within this product's enclosure and contact with any of these voltages will result in electric shock. This symbol alerts the user that important and maintenance (servicing) instructions in the literature accompanying the unit. To prevent electric shock: do not use this unit's polarized ac plug with extension cords, receptacles or other outlets that prevent the units plug from being fully seated and leave any part of the blade exposed. 1 INFORMATION Installation of this equipment shall be in strict accordance with the manufacture's instructions. [. . . ] 3) Press the SEEK buttons to toggle between the hours and minutes. Once the alarm is set it will sound each day at the same time as long as it is activated. DEACTIVATING ALARM 1) Press the SET button twice to enter the alarm mode. The set time will disappear from the Display Window and a series of dashes (--: --) will appear, Alarm DEACTIVATED mode. NOTE: The set time will be stored in memory and can be reactivated whenever desired by performing step 1) ­ 3) of the ACTIVATING ALARM procedure. SETTING THE ALARM TONES 1) Press the SET button twice (power off). 2) Press the P4 button once to hear the alarm tone. NOTE: Alarm must be in the "Activated" mode to hear tones. 3) Each time CH UP/DOWN button(s) is pressed it will select a different alarm tone. 4) Press the ON/OFF button to confirm the selected tone. 5) When the alarm sounds, press the ON/OFF button to turn it off. SETTING THE ALARM VOLUME 1) Power OFF 2) Press the SET button twice for the Alarm setting mode. 3) To select alarm tone, Press "P4" button and press volume UP/DOWN for your desired volume level. Then, press "SET" button for volume setting 18 SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display. 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC). 5) When the desired mode is reached, press the ON/OFF button to confirm. SETTING THE AIR TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) Press the SEEK button to select the AIR mode. SETTING THE SPEAKER MODE 1) With power off, press the SET button four times to enter the speaker configuration mode. 2) Press the seek button to toggle between the I SP and E SP 3) When the desired mode is reached, press the ON/OFF button. [. . . ] The disc being played does not support ANGLE functions. In order to check whether the disc supports the ANGLE functions, see if the ANGLE indicator on the upper part of the main display is illuminated. Subtitles cannot be changed Vocal languages (AUDIO) cannot be changed No sound output · · · · · · · The disc being played does not support subtitle functions. The disc is prohibited from changing subtitle languages. The disc being played does not support AUDIO functions. [. . . ]