User manual AUDIOVOX VME9311TS

[. . . ] VME9311TS MULTIMEDIA RECEIVER MANUAL/WARRANTY CARD CONTENT - Preparation - Adjustment of the Touch Screen Monitor - Installation - Controls and Indicators - Remote Control - Using the TFT Monitor - Operating Instructions - System Setup Menu - Tuner Operation - RDS Information - DVD Player Operation - DVD Setup Menu - CD/MP3/WMA Operation - iPod Operation - Troubleshooting - Specifications - Guarantee conditions, warranty card p. 67 PREPARATION Congratulations on your purchase of the Audiovox Mobile Multimedia AM/FM/DVD /iPod (not included) Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Audiovox installed by a reputable installation shop. Features • • • • • • • • • • • • • • Single DIN Size Ultra slim slot-in DVD core mechanism 7 inch Panasonic TFT monitor Wide screen TFT display and segment LCD display Rotary volume control ISO Double-DIN chassis Light weight proprietary DVD core mechanism Wide screen (16:9) 6. 5" TFT touch screen monitor Main System 13 Watts x 4 RMS / 40 Watts x 4 Peak 160 watts total system power AM / FM RDS Tuner Supports NTSC and PAL, auto negotiation Full, Wide, Normal and Off (Standby) screen modes Motorized TFT panel has 16 precise angle adjustments via remote control or infinitely variable manual adjustment from the front panel • Over current motor protection for obstructed TFT panel • Compatible optical formats: DVD-R/RW, DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/ WMA files burned onto a DVD+R/RW or DVD-R/RW and Kodak Picture CD • Multi-language, multi-subtitle and multi-angle playback options • Last position memory for optical disc. 3 • Parental Lock - Uses a password and disc rating set-up to prevent unauthorized user access from display content • Audio Mute • 5-way joystick navigation • Remote control - a full function remote control • Over and under voltage protection to insure the unit operates within designed parameters • Damped DVD mechanism with 16 Mbit flash memory ESP (Electronic Shock Protection) provide smooth disc playback under the severest road conditions Tools and Supplies You will need these tools and supplies to install your Moniceiver: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connections • 18 gauge wire for power connections • 16 - 18 gauge speaker wire WARNINGS! - Only connect the unit to a 12-volt power supply with proper grounding. [. . . ] Strong Local Signal Broadcasting Indicator: Touch and hold to activate/deactivate Local function 6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a station 7. BAND: Touch to change between AM/FM bands 17. AS: Touch to automatically store stations 18. Touch this area to return to the MAIN MENU SUBJECT TO TECHNICAL CHANGE 34 Switch to Radio Tuner source Press the SRC button (15) on the front panel or remote control (8) to switch to the TUNER source. Select FM/AM Band Touch the BAND button (16) on the screen, or press the BAND button on the unit (14) or remote control (20) to change between the following bands: FM1, FM2, FM3, AM1 and AM2. Auto Tuning Press and hold the button (19) on remote control or screen, or the button on the joystick (17) to seek the next available radio station by increasing the tuning frequency. Press the button again to stop searching. Press and hold the button (17) on the remote control or screen, or the button on the joystick (16) to seek the next available radio station by decreasing the tuning frequency. Press the button again to stop searching. Manual Tuning Press the or buttons (14, 22) on the remote control or screen, or the or buttons (18, 19) on the joystick to increase or decrease the tuning frequency one step. Press and hold the buttons to continuously tune until you release them. Using Preset Stations Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen. Select a band (if needed), then select a station. Touch and hold an on-screen preset button (6) for three seconds. The preset number appears at the top of the display. 35 Recalling a Station 1. Touch an on-screen preset button (6) to select the corresponding stored station. Auto Store (AS) Automatic Storing of Preset Stations To select six strong stations and store them in the current band: 1. Touch AS (26) for 2 seconds to activate the Auto Store function. The new stations replace stations already stored in that band. Local Radio Station Seeking (LOC) When the Local function is on, only radio stations with a strong radio signal are played. To activate the Local function in AM/FM tuner mode, press and hold the LO/DX button (6) on the front panel while the yellow volume bar IS NOT visible. When the Local function is active, “LOC” appears on the screen and a green indicator is illuminated. RDS INFORMATION Within the RDS Setup Menu (OSD) you will find the following setup possibilities. OVERVIEW OF THE RDS FUNCTION A) Notes: - RDS is only available for FM receiption - The PS function allows station names to be displayed in clear letters. SUBJECT TO TECHNICAL CHANGE 36 - Network Tracking receiption uses the PI and AF codes. The PI code identifies the country, area and broadcast system. AF lists up which reception frequencies at the area are broadcasting the same program and automatically changes to the best reception quality offering frequency without the need to interrupt the program by a seek function. [. . . ] The Moniceiver will release control back to the iPod so you can select video media to be displayed on the TFT monitor. To exit PHOTO mode, press the button (14) on the remote control or MENU button on the iPod. NOTE: After disconnecting your iPod, the Moniceiver will always return to last mode accessed when your iPod is plugged back into the unit. 59 Fast Forward/Fast Reverse To fast forward or fast reverse, press and hold the or buttons (17, 19) for 1 second and continue to hold. Search Playlist/Artist/Album/Song To search through Playlists, Artists, Albums and Songs, press the 1 button (29) on the remote control while in one of the following directories: Playlist, Artist, Album or Song. [. . . ]