User manual AUDIOVOX VOD102

[. . . ] In the interest of safety, the VOD102 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. [. . . ] This button is also used to make picture adjustments in the picture select mode. Note: The volume buttons will not affect the volume of wireless headphones or a wired FM modulator. When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio's volume control (see page 15, Headphones, or page 16, Wired FM Modulator). NUMBER Buttons - Allows the user to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters, and password setting. - Allows the user to enter the numbers 0 to 9 for selection of TV channel. EJECT ( )Button* Use this button to eject a disc. FM TRANSMITTER ON/OFF Button Turns FM Modulator power on/off. SOURCE SELECT Button* With FM ON, used to select from POD Audio (Selected Source mode) or SAT Audio (Second IR input). With FM OFF, used to select from SAT Audio or Car Audio. CHANNEL SELECT Button Selects the FM modulator Frequency (Frequency 1, 88. 3MHz, Frequency 2, 88. 7MHz, Frequency 3, 89. 1MHz, Frequency 4, 89. 5MHz, Frequency 5, 89. 9MHz, Frequency 6, 90. 3MHz). -13- 128-7092 13 of 28 Turning the VOD102 On or Off 1. Sliding the screen release lock in the direction of the arrow will unlock the LCD screen and it will drop down slightly. · Audio discs ­ Audio CDs contain musical or sound content only. · MP3 discs ­ A disc that contains audio files (for example, a CD-R with downloaded MP3 files). · VCD discs ­VCD discs which contain video. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Note: the following Discs CANNOT be used with this player : · MiniDisc · Laserdisc · CD-I, CD-ROM, DVD-ROM To load and Play a Disc Press the Power button to turn the unit ON. Select DVD mode and insert the disc (Label Up) into the disc compartment. -17- 128-7092 17 of 28 Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen DVD SETUP menu. Using the Setup Menu Using the setup display, you can do the initial setup, adjust the picture display ratio (16:9 or 4:3) and set the various outputs. You can also select a language for the on-screen display, setup display and limit playback by children. 1) Press the SETUP button to display the "setup menu" on the display screen. 2) Select the main item you want using the cursor () buttons, and then press the !To Cancel Using the Setup Display Press the SETUP button on the remote. Setting the Language for On-Screen Display Press the SETUP button and using the ( )buttons select "OSD LANGUAGE". [. . . ] · Check the type of disc you put into disc tray. This DVD player only plays DVD's, audio CDs and MP3s. · Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. [. . . ]