User manual AUDIOVOX VOD122

[. . . ] Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth !Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. [. . . ] PLAY ( )Button* Press this button to activate the play mode while a disc is loaded into the disc compartment. -11- 128-7034 11 of 26 Turning the VOD122 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality. Remember to turn the unit off and pivot the LCD Panel to the locked position when not in use. Overhead Dome Lights The lights integrated into the VOD122 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times, and the auto position will allow the lights to turn on and off with the vehicle's interior lighting. Refer to the Installation Manual for the wire connections. Select DVD mode and insert the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin. -15- 128-7034 15 of 26 Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup menu you can do the initial setup and set the various options. You can also select a language for the on-screen display, the setup display, and limit play back by children. 1) Press the SETUP button to display the "setup menu" on the TV screen. 2) Select the main item you want using the cursor ( To Cancel Using the Setup Display Press the SETUP button on the remote. Setting the Language for On-Screen Display Press the SETUP button and using the )buttons select "OSD LANGUAGE". ( OSD (On-Screen Display) Language Menu The OSD Language Menu allows the user to select the language for the on-screen display. It displays the current track , the total amount of tracks, and the amount of the time for the track playing. Press the DISPLAY button on the remote to change the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. [. . . ] · Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s. · Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. [. . . ]