User manual AUDIOVOX VOD85

[. . . ] VOD705 VOD8512 / P ICTURE S ELECT S OURCE ON OFF AUTO VO LUME FM S ELECT P S VOD8512 S / VOD8512 P DVD PLAYER WITH DROP-DOWN VIDEO MONITOR HEADPHONES INPUT VID EO IR AUDI O R L ® ELECTRONICS CORP. 128-7256A Released 10-27-04 Revised 2-9-05: Added silver and shale colors to manual. corrected number sequence (10, 11 & 12) on pg. 5 128-7256A 1 of 35 Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in "park" or when the vehicle's parking brake is applied. [. . . ] The repeater function allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from most manufacturer's remote controls to its respective component connected to the AV 1 input. In this case you must use the remote control supplied with the component. Accessories Wireless Headphones The VOD8521 includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number MVIRHS). The volume can then be adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones. -16- 128-7256A 16 of 35 Wired Headphones There are two 1/8" headphone jacks on the VOD8521 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the VOD8521 or the remote control. Wireless FM Modulator The VOD8521 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOD8521 audio signal by tuning your vehicle's radio to the selected frequency, (88. 3, 88. 7, 89. 1, 89. 5, 89. 9MHz). This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit. AV1 Input The AV1 video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To access the A/V1 input, turn the VOD8521 on and press the source button on the VOD8521 or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control. The VOD8521 is now ready to play the audio and video signals from the source connected to AV1 input. *NOTE: In certain areas where there are a large number of FM radio stations (e. g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod. If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product. -17- 128-7256A 17 of 35 AUX A/V Input The VOD8521 will accept an audio/video input through the RCA jacks located on the side of the unit. The audio / video device could be a video game system, video camera, or other input device. Audio/Video Out The VOD8521 provides an AV output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details. ) This output will provide an A/V signal that duplicates the signal processed by the VOD8521 to an additional monitor or video display. The audio signal can also be used to feed an AUX input on a vehicle radio if available. [. . . ] · Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. This DVD player is Region Number 1. Can't advance through a movie · You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. -31- 128-7256A 31 of 35 PROBLEM The icon ( appears on screen ) SOLUTION The feature or action cannot be completed at this time because: 1. The disc's software doesn't support the feature (e. g. , angles) 3. [. . . ]