User manual AUDIOVOX VOH681A Operation Manual

[. . . ] Volume Up/Down ­ Controls volume to headphone jacks and external speakers if connected. Source Select ­ used to select one of the three A/V sources. Source indicator LEDs - Indicate the current video source. [. . . ] Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. Remote Sensors The VOH681A incorporates two infrared sensors which relay signals from any infrared remote control to allow a remote mounted device to be controlled simply by pointing its remote control at the remote sensor eye mounted on the pod. This provides control of auxiliary equipment such as Video Cassette and DVD players. The infrared sensors can relay signals from any manufacturer's remote control to its respective component connected to the AV1 or AV2 inputs. Dome Light Switch Remote Sensor eye Remote Sensor eye -6- Optional Accessories External Auxiliary A/V Stereo inputs (Aux ) These inputs are provided to facilitate the temporary connection of optional audio / video equipment, such as a camcorder or video game system. They can be accessed by removing their protective plastic cover located behind the LCD hinge. To play a source with these inputs, use RCA patch cord to connect the audio / video signals to their respective jacks. Mono audio sources will require the use of an RCA Y cable (PN 0892165) to connect to both right and left inputs. Once the connections have been made, turn the VOH681A on and press the source selector button on the pod until the "AUX" indicator LED illuminates. The unit will now play the audio and video signals from the accessory connected. Wired Headphones There is one 1/8" headphone jack on the VOH681A that can be used with any standard stereo headphone. This jack is controlled by the volume up / down buttons on the VOH681A or the remote control. Remove and save the protective plastic cover to access the jack. Remember to replace the cover when the jack is not in use. Wireless Headphones The VOH681A includes a built in infrared transmitter for use with Audiovox wireless headphones (PN MVSWHS). Turning the headphone switch on, and wearing them activates the internal micro switch which will activate the internal IR receiver and the volume can then be adjusted separately with the controls on each headset. Any number of wireless headphones can be used, but all must be within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. [. . . ] Use only a lightly dampened lint free cloth to wipe the screen if it becomes dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. [. . . ]