User manual AUDIOVOX VR100

[. . . ] Do not mount radio within close proximity of engine compartment. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. Protect the Disc Mechanism Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of this unit. [. . . ] In any mode, press the TA button to access Traffic Announcement mode. New stations 9 VR100 CD/MP3/WMA OPERATION Repeat Play Press the RPT button (5) during disc play to repeat play the current track. Press RPT again to stop repeat play Random Play Press the SHUF button (7) on the control panel during disc play to play all tracks on a CD in random, shuffled order. "SHUFFLE" will display in the upper right corner. Press SHUF again to stop random play. Selecting MP3/WMA Tracks The AS/PS button (15) functions as the Digital Audio Mode selection button during MP3/WMA operation. Press the AS/PS button (15) once to search for a track name directly. The current track number will be displayed: "DIRECT 002". Rotate the VOLUME control (1) to change the track number. Press the ENTER button (22) to search the track. Press the AS/PS (15) button two times to search for a Directory or File Name. Use the VOLUME control (1) to input numbers 0 ­ 9 and characters A ­ Z. Press the ENTER button (22) to confirm entry of the hundreds digit. Use the TUNE ADJUST UP/DN knob to select a number for the tens digit position. Press the ENTER button again to confirm entry of the tens digit. Use the TUNE ADJUST UP/DN knob to select a number for the ones digit position. Press the ENTER button to tune to the selected channel. Activating Sirius Satellite Radio In Sirius mode, press and hold the S-MOD button (22) to select DIRECT mode. The LCD will display "DIRECT _ _ _" upon entry. Use the TUNE ADJUST UP/DN knob (22) to select "0" and then press the ENTER button (22) to input the number. Enter "000" to display the 12 digit Sirius ID. Selecting a Band In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in the following order: SIR1, SIR2, SIR3. Skip Channel Mode 1. Press and hold the S-MOD button (22) to switch to Direct Tune/Skip Channel mode. While the display is showing "DIRECT _ _ _", press the S-MOD button to access Skip Channel mode. Use the TUNE ADJUST UP/DN knob (22) to select the channel to be skipped. [. . . ] Use and store the product only in normal temperature environments. High temperature can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts. Ignition The most common source of noise in reception is the ignition system. This is normally due to the fact that radio is placed relatively close to the ignition system (engine). This type of noise can be easily detected because it will vary in intensity of pitch with the speed of the engine. [. . . ]