User manual AUSTRALIAN MONITOR ZM3 BROCHURE

[. . . ] Description The Australian Monitor ZoneMix3 is an extremely versatile and innovative mixer and signal router. Featuring a broadcast quality audio spec, the ZoneMix3 allows selection of 4 stereo sources to 3 stereo zones either at the ZoneMix3 or remotely. One stereo source can have selectable priority per zone and each stereo zone boasts 5 stage equalisation. [. . . ] Trim is controlled from the front panel. LINE4 is a priority input, if this feature is enabled. PAGE INPUT There is an RJ45 connector on the rear of the unit accepts a CAT-5 cable from the optional ZM3M Paging Station. SUM INPUT This input has overall priority and is usually used for an emergency tone or message. Outputs There are 3 Stereo Zone balanced XLR Outputs. The zone outputs are configured as stereo left and right as default but can be internally changed to mono. Link Two ZoneMix3 Units can be linked together to provide six stereo zone outputs. Controls There are various levels of control you can use to ensure the optimum result from your ZoneMix3. They include: Trim Control for all inputs 5 Stage EQ on each zone output Mic/Line Selection for the first two inputs Program Control for selecting a program source via the front panel. This can also be done remotely with the ZM3R Remote Source/Volume Selection Unit Metering and Status A "status" LED gives an indication of OUTPUT signal. It glows green at -30dB and red at 0dBV (1V). This is meant to indicate clip within the ZoneMix3. When used with Australian Monitor Synergy amplifiers, both LEDS on the ZoneMix3 and the Synergy amplifier will go red simultaneous indicating system clip (with pot at full on the amplifier). A "remote" LED indicates that the zone is in remote control mode. A "power" LED indicates there is power to the unit. Remote Panels and Stations A Remote Volume/Source Panel (ZM3R) is available per zone. It is connected to the unit by CAT-5 cable. From this panel the user may adjust volume and select one of the four program sources, or the OFF position. [. . . ] Program source selection may be made via the front panel or a remote wall panel connected by CAT-5 cable. The unit shall have an optional microphone paging station which allows the paging of the 3 individual zones or all zones at once. The unit shall be an Australian Monitor ZoneMix3. Australasia and Europe: AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233 SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 NZ Tel: (09) 415 9426 Fax: (09) 415 9864 Export Enquiries: international@audiotelex. com. au Website: www. australianmonitor. com. au USA: AUSTRALIAN MONITOR AUDIO INC, PO Box 3126, Lynnwood, WA, 98046 USA Tel: 425-673-5175 Fax: 425-673-7825 Email: sales@australianmonitor. com Website: www. australianmonitor. com [. . . ]