User manual AUSTRO FLAMM VILLA BACK

[. . . ] The rules in force in your country should always take precedence. Do not wear loose or flammable clothing when adding fuel to the fire. Placing non-heat-resistant objects on the heating unit or in the vicinity of the heating unit is forbidden. Do not lay laundry onto the stove for drying. [. . . ] the lacquer surface is still soft at the time the stove is shipped. The lacquer will harden when your stove is used for the first time. The lacquer surface may not be touched when it is heated for the first time. The stove must be initially heated to a high temperature for at least 1. Visible vapors may appear during the hardening of the lacquer. For this reason it will be necessary to open windows during initial operation in order let the vapors escape into the outdoors. PLEASE TAKE NOTE: It takes several heating sessions before for your stove releases only the pleasant smell of burning wood. Figure 1 provides a good overview of the materials you will need. Dry, well cured and natural wood, wood briquettes, brown-coal briquettes. Lay uncoated paper on the floor of the firebox. Lay one or two logs of wood on the wood chips. The wood must be dry (relative wood moisture < 15%) and untreated and the right amount of wood must be burned in order to ensure a clean fire that releases only small amounts of emissions. As soon as the chips are burning well, close the primary air supply. Prepare everything you need for starting the fire-- soft wood chips, igniter materials (such as Thermohit wood/coal igniter), uncoated paper, As soon as the wood logs are burning well, you can regulate the heating capacity with the secondary air slider. (Slider set to the maximum ("AUF") setting produces maximum heat ­ see Figure 2. ) When adding wood to the fire, follow the same procedure as when igniting the fire: Open primary air, open secondary air, carefully open firebox door, lay wood on the fire, close the firebox door. Wait until the added wood catches fire and is burning. Description bottom left, keramott bottom right, keramott grate wood retainer, keramott side component left, kermott rear, keramott baffle plate, keramott cornerstone left/right, keramott side component right, keramott Nr. You can obtain floor plates of glass or steel, fireplace utensils or care products from your certified dealer. IMPORTANT: Have defective parts replaced by your certified dealer. [. . . ] We guarantee full functionality of all AUSTROFLAMM stove components made of steel or cast iron for a full two years from the date of purchase. Steel and cast-iron components which show defect in materials or workmanship during the guarantee period shall be replaced with new components. We do not guarantee wearable components (such as Keramott, gaskets, floor grid), surface coatings, lacquer, glass and ceramics. Your AUSTROFLAMM stove was installed by a certified professional and is operated in accordance with the operator's manual. [. . . ]