User manual AVANTI 248YC

[. . . ] We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages . This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the wards" DANGER", "WARNING" or "CAUTION". Danger means that failure to heed this safety statement may result in severe personal injury or death. Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death. Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage. [. . . ] Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The freezer compartment temperature is preset and cannot be controlled by the thermostat ?The first time you turn the unit on, set the temperature control to "6. " ?The range of the temperature control is from position "OFF" to "6". After 24 to 48 hours, adjust the temperature control to the setting that best suites your needs. The setting of "4" shoud be appropriate for home or office refrigerator/freezer use. To turn the appliance off, turn the temperature control to "OFF". Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off the power to the refrigerator/freezer. If the unit is unplugged, has lost power, or is turned off; you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator/freezer will not start. Using Your Ice Cube Tray ?Recommended thermostat setting for ice making is position 6. The outside of the refrigerator/freezer should be cleaned with mild detergent and warm water. Wring excess water out of the sponge or cloth before cleaning the area of t he controls, or any electrical parts. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. CAUTION: Failure to unplug the refrigerator/freezer could result in electrical shock or personal injury. Defrosting Your Refrigerator/freezer ?For the most efficient operation and minimum energy consumption, defrost the refrigerator/freezer when the frost on the freezer walls is excessive or ¼ inch thick. To start defrosting, turn the temperature control to "OFF", unplug the refrigerator/freezer, remove the food and shelves. After the frost or ice has melted, discard the melted water and dry up the interior of refrigerator/freezer. Then the refrigerator/freezer can be restarted by a turning its thermostat to the desired setting. CAUTION Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. Use a sponge or towel to pick up the melting ice off the refrigerator/freezer floor. [. . . ] Para evitar vibraciones, este equipo debe estar bien nivelado. Para encender el refrigerador, gire el control de temperatura a la posición que corresponda al enfriamiento deseado. Bajo condiciones normales mueva el control a la posición "3". CERRADURA DE LA PUERTA Su unidad viene equipada con una combinación de cerradura y llave. [. . . ]