User manual AVANTI BCAD680 Instruction Manual

[. . . ] BEVERAGE CENTER / ENFRIADOR DE REFRESCOS INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model Number / No. de Modelo: BCAD680 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. La sección en español empieza en la página 18. Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. Avanti Products, A Division of The Mackle Co. , Inc. Box 520604 - Miami, Florida 33152 www. avantiproducts. com APPLIANCE SAFETY Your safety and the safety of others are very important. [. . . ] The range of the temperature control is from 34 ºF to 43ºF. You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP and DOWN button at the same time for 5 seconds . Fahrenheit and Celsius degrees indicator will appear in green color in the "SET" window. The temperature inside the unit will be appear in red color in the "DISPLAY" window. NOTE: ?If the unit is unplugged, power lost, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the appliance will not start. ?Interior Light The light switch is located on the right of control panel. You can turn the interior light ON or OFF by pressing the light switch. ?Door Lock Your unit is provided with a lock and key combination. The keys are located inside the plastic bag that contains the User's Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping. ?To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment. For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail compartment, however this unit was designed with a plastic post on each sides of the shelf tracks to prevent bottles from falling. 10 ? When removing any of these shelves out of the rail compartment, you must first disassemble and remove both of the plastic posts after removing the Phillips screws that holds each post in place. See figure "AA" FIG "AA" CARE AND MAINTENANCE ?Replacing Your Fluorescent Light NOTE: All parts removed must be saved to do the replacement of the fluorescent light. Before removing the fluorescent light, either turn off the appliance or disconnect the electricity leading into the appliance at the main power supply. Failur e to do so could result in electrical shock or personal injury. Pull down to remove the fluorescent light cover (3) softly. Rotate the fluorescent light (2) 90° and pull down softly to remove it from the light holder (1). Replace with a T-5 fluorescent light that is the same shape and size. Unplug the appliance, and remove all items including shelves. [. . . ] Para cerrarla, gire la llave hacia la derecha. Quite la llave y colóquela en un lugar seguro para evi tar que se pierda. Descongelación Su refrigerador para refrescos ha sido diseñado con un sistema de descongelación de "ciclo automático". Las superficies refrigeradas del compartimiento para refrescos se descongela automáticamente, durante el ciclo "apagado" del control de enfriamiento (termostato). [. . . ]