User manual AVERMEDIA 500621200828

[. . . ] AVerTV Hybrid+FM Volar User’s Manual English DISCLAIMER All the screen shots in this documentation are only example images. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. [. . . ] To change back to live TV, click the Change Radio Source button. 2 How to Auto Scan FM Radio Channels If you are using FM radio for the first time, perform an auto scan to search and memorize active FM radio stations in your area. Click the Setup button and in the Setup dialog box, click AVerTV Hybrid+FM Volar icon on the left pane. Click New and the Program List dialog box will appear. Type in the desirable name and click OK. Note: The system will assign a default name (FM-Radio) if you don’t create a new program list before scanning. Click Apply to save the settings and click OK to exit the current dialog box. 3 Manually Scanning Specific FM Channels Instead of scanning all channels, you can choose to manually scan one or a few channels only. And in the Setup dialog box, click FM Radio icon on the Enter the channel frequency that you want to start scanning in the text box. Click The scanning will stop when the application finds the closest ACTIVE FM frequency. Or click or to increase/decrease the frequency to search your preferred channel. Click the Modify button if you’d like to keep the newly scanned frequency. There are a number of ways to select a channel: ‧ Click on the Numeric buttons to select a channel. € Click the Channel Up/Down button repeatedly until reaching your desired channel. OR, ‧ Use the numeric keys on your keyboard to select a channel. 5 Skipping Unwanted Channels If you want to exclude undesirable channels from your FM channel list, do the following: 1. Click the Setup button and in the Setup dialog box, click FM Radio icon in the left pane. In the Program column, click the unwanted channel. The check mark will be removed, indicating that the channel will be excluded from your channel list and that you won’t be able to access and hear them through the Channel Up/Down button. 6 Adding a Radio Frequency If the desired channel cannot be found through scanning, follow the instructions below. And in the Setup dialog box, click FM Radio icon in the Specify the correct frequency in the text box (as shown below) and click Save. 7 Modifying a Channel Name You can manually modify any existing FM radio channel. [. . . ] To immediately watch or listen to the TV/FM program which is being recorded, just double-click this icon. In the After Record-Schemes, it automatically switches to the selected power control mode when the schedule recording is completed. Choose an appropriate power control status listed below: ‧ Watch TV: Switch to real-time TV mode. € Hibernate: Save everything and then turn off your computer. [. . . ]