User manual AVERMEDIA AVERTV 6

[. . . ] AVerTV 6 User Manual English DISCLAIMER All the screen shots in this documentation are only example images. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. COPYRIGHT © 2008 by AVerMedia TECHNOLOGIES, Inc. [. . . ] When there are programs/frequencies missing from the program list, select Single Frequency or Range Scan. Specify the correct input port, polarization, frequency and symbol rate. After scanning, new active programs/frequencies will be memorized and listed on the left pane of the dialog box. Click Apply to save the scanned channel. Please be patient. 45 AVerTV 6 4. 3 Digital TV 4. 3. 1 Scanning Channels If you haven't done channel scanning when you first run the application, please follow the steps to complete this procedure. Click the Setup button device in the left pane. Note: Make sure that your Country/Region is correct. First, select an available AVermedia device in the left pane. From the Region/Country drop-down list, select your country or region. and in the Setup dialog box, select an available Avermedia (This picture is onl y for reference. ) 13. Then select Digital TV (or Programs). 46 AVerTV 6 (This picture is onl y for reference. ) 14. Click New and the Program List dialog box will appear. Type in the desirable name and click OK. 15. Then click Program Scan to start the searching process. The application comes with a default frequency table therefore the application will use this table to search for active channels/programs. If you want to terminate the searching process, just click Stop. You can check the scanning progress from the progress bar. After scanning, the active TV/Radio channels will be listed inside the box. Click Apply to save the scanned channels. 47 AVerTV 6 (This picture is onl y for reference. ) Note: All programs automatically classify into two categories (Digital TV and Digital Radio). Select Digital TV to display TV programs; select Digital Radio to display radio programs. 4. 3. 2 Scanning Channels (For Advanced Users) 5. Click Advance located in the lower right corner of the Program Information section. Then the Advance Program Configuration dialog box will appear. [. . . ] Select "Online Media" library". "program 3. Select "Video Gaming Plug In". 4. 5. Select the video source you want to view via "Video Gaming Plug In". Click button to view images in a full-screen window. [. . . ]