User manual AVIOM A-16II

[. . . ] A-16II Personal Mixer User Guide Information in this document is subject to change. 1. 01 Part Number 9301 1006 0001 Aviom, Inc. 1157 Phoenixville Pike Suite 201 West Chester, PA 19380 USA +1 610-738-9005 +1 610-738-9950 (fax) www. aviom. com READ THIS FIRST Important Safety Instructions !Install in accordance with the manufacturer's instructions. [. . . ] You should see the volume changes you're making reflected in the Volume LED indicators. There are twenty-four visible volume steps available in the Volume LEDs. Each LED lights at two levels--one at half brightness, the other at full brightness. The procedure for setting the pan position for a Channel is similar. Once a Channel is selected, you can turn the PAN knob left or right to move the Channel in the stereo field. Your changes will be reflected in the Pan LEDs. Changes will be heard immediately in any speakers or headphones connected to your Personal Mixer. Note: If you have connected the output of the Personal Mixer to a mono audio system or speaker, pan position is irrelevant. A Channel is playing in the center of the stereo field when only the center (green) LED is lit. As you turn the PAN knob, the Pan LEDs will light in various combinations to indicate the pan position. Continue this process of setting volume and pan until all the Channels have been added to the mix. At this point you should have a basic mix playing in your monitors. You can continue to make changes in real time as your needs require. Remember that changes to Channel volume and pan setting affect the selected Channel only. The selected Channel always has its red LED lit. Linking Channels For stereo input sources such as keyboards, drum machines, CD players, main mixer submixes, etc. , the Aviom input modules provide a convenient method of controlling these two-channel sources. A Link is simply two Channels working together as one to process a stereo input. Linking two Channels is done from the front panel of the input module. Each pair of inputs has a corresponding Link switch. When the switch is positioned to the left, the two Channels are independent. When the switch is moved to the right, the Channels become linked. Only adjacent Channels can be linked (Channels 1 and 2, Channels 3 and 4, etc. ). 22 When Channels are linked, they act as one source on the A-16II Personal Mixer. When you select either of the two linked Channels on the Mixer, both LEDs will light up, indicating that they are linked. Volume changes affect both Channels simultaneously. [. . . ] When a Preset has been saved correctly, you will see all sixteen Channel LEDs flash momentarily to confirm the save operation. Problem: In Group mode, I can't select a new Channel. Possible Solutions: · If you already have three Groups defined and attempt to select a new Channel that is not part of an existing Group, the button press is ignored. This happens you are trying to create a new which would exceed the limit of three Groups per Preset. [. . . ]