User manual AVIOSYS IP KAMERA 9076FXD V1.2.1.6

[. . . ] IP Kamera 9076FXD User Manual Release Date: 10/12/2010 Manual Version: V1. 2. 1. 6 - 1Ref#9076101012 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9076 was designed for indoor use only. It is the responsibility of the user for any possible damages caused by outdoor use, especially in the rain. Please use the power adapter provided by the dealer, the manufacturer responsibility for the possible damage from using power adapters not. [. . . ] If your email server requires this option, make sure to have this section checked. Account Name: Enter then login of the mail account Password: Enter the password of the E-mail account Use SSL Connect: If the email server requires SSL (Secure Sockets Layer) this option need Sender Email: Enter the Sender Email Address SMTP Server: Enter the SMTP Outgoing mail address - 31Ref#9076101012 Email Address: Enter the Receiving Email address Submit: After all settings have been made. Hit the submit button to save all changes. Send Test E-Mail: This button will send a test e-mail to the designated account. This way, you can check to make sure that the settings are correct. Note: If you are having problems sending emails out and the settings are correct. Please check your DNS Server address to make sure you can send email out. SNTP The SNTP is a protocol for synchronizing the clocks of computer systems. SNTP Server: Enter the SNTP server address. Below are a list of free public NTP servers. Europe -- europe. pool. ntp. org Asia -- asia. pool. ntp. org Oceania -- oceania. pool. ntp. org North America -- north-america. pool. ntp. org South America -- south-america. pool. ntp. org Africa -- africa. pool. ntp. org Time Zone: Enter the corresponding time zone Automatically adjust for daylight saving time: Check this section if you want daylight saving time to be implemented automatically. - 32Ref#9076101012 IP Service IP service is a added service that provides you a platform so you do not remember a long IP Address. Just enter the name of your device into IP Service and you can find your device. Note: Port forwarding will be required on your router to connect to the device In this section you can to turn off/on this service as well as select which server you would like your device on. Note: IP Service is set to ON by default. To close this feature, uncheck the enable button. IP Service Server: There are 3 IP Service Servers that can be selected from: Power and Video Server: This is the server where most IP Power products and IP Video server products can be found. Kamera Server: This is the IP server where most IP Kamera products from Aviosys will be found on. CNT Server: Cross Network Technology Sever. CNT allows user to connect to their IP Kamera without having to Port Forward to the device. Camera Title: This is the name of the device. Country: The country where the device is located. City: The city where the device is located. MAC: Physical address or MAC of the device. Once you have setup IP Service you can connect to IP Service through software IP Edit Search tool or through www. myIP Edit . com - 33Ref#9076101012 Enable Share: Check this feature to enable video sharing on guest accounts only. Make sure that the guest account has already been created in the user section. [. . . ] To leave a message on a message board of the device: 1. ) Right click on the device and select message board. - 64Ref#9076101012 2. ) Then type in the name of the person, email and the message. 3. ) Once a message has been set it will look like the picture below. Go to Device So if for some reason, you need to connect to the device directly to modify some of the settings on your IP Kamera. You can use the go to device button to directly open a internet browser and go to the camera. To do this follow the following instructions:. 1. ) Right click on the device that you would like to connect to and select go to device. 2. ) Then enter the correct login and password into the internet browser to connect to the device. - 65Ref#9076101012 12. ) Frequently Asked Questions (F. A. Q) Q1: Why can't I view the video files that I have recorded, nothing is playing? [. . . ]