User manual AVISION AV830CP

[. . . ] User's Manual For AV810C Plus/AV820C Plus/AV830C Plus Document Imaging Scanner Doc. 250-0332-E V1. 0 Avision Inc. Trademarks Microsoft is a U. S. registered trademark of Microsoft Corporation. Windows and MS-DOS are trademarks of Microsoft Corporation. [. . . ] Start Windows 3. 1, Windows 95, Windows 98 or Windows NT 4. 0. Insert Avision PaperCom Supreme to your CD-ROM drive. CD 3. 2. 1 3. WINDOWS 3. 1 OR WINDOWS 3. 1X From the File Menu, choose RUN. Type d:\driver\scsi. exe (d means the letter indicating your current CD-ROM drive). Choose O. K. 3-4 3. 2. 2 3. WINDOWS 95/WINDOWS 98/WINDOWS 2000 OR WINDOWS NT4. 0 Press the Start button and choose RUN. Type d:\driver\scsi. exe (d means the letter indicating your current your CD-ROM drive). Follow the subsequent instruction on the screen to complete the instruction. (Normally just press OK and the installation will be completed. ) 4. 3-5 4. SCANNER OPERATION AV830C Plus allows you to operate the scanner from within a TWAIN or plug-in software application. As the scanner driver is not a stand-alone software, it has to be started from withinTWAIN*-compliant a software application and then the scanner driver is able to scan and load the image to your computer. The command to start the scanner driver may vary due to different software applications. To check the correct command, please refer to the user manual of your software application. 4. 1 STARTING YOUR FIRST SCAN FROM WITHIN A TWAIN OR A PLUG-IN APPLICATION MAC Users 1. Start your application(For example, Adobe PhotoShop, Ulead ImagePals, MGI PhotoSuite and so on. ) From File menu, choose Import command . Select MrScan X. x. x from the submenu of Import. 2. 4-1 3. 5. The Mac Plug-in user interface will pop up on the screen. Place the document upside down on the document glass with the text facing away from you. Click the Preview or Scan button to preview or scan your document or image. Figure 4-1 Mac Plug-in user interface *TWAIN Stands for Technology Without An Interesting Name, an : industry-standard protocol which exchanges information between the application and image acquisition device such as scanners. 4-2 PC Users 1. Open your application and chooseSelect Sourcefrom the File menu. If theSelect Source command is not available from the File menu, see the user guide of your application to learn how the TWAIN link is used. A dialog box appears containing the different TWAINsources for you to choose from to bring an image into your application. 2. 4-3 Select MrScan-Expert the source. You need to select MrScan-Expert for just once except when you need to use the dialog box to select a different source. In that case, you will need to selectMrScan-Expert as the source again before you can reuse the scanner. Place the document upside down on the document board with the text facing away from you. Avision TWAIN user interface as Figure 4-2 will pop up on the screen. [. . . ] 2) Use the paper guide when feeding the paper. Question: When I power on the scanner, it makes noises and will not stand ready. Answer: There are two possibilities: 1) You forgot to remove the shipping retainer from the scanner. Please remove the shipping retainer first. [. . . ]