User manual AVITAL PHOENIX 2

[. . . ] A - Owner's Manual 0399 Table of Contents Phoenix . 3 One-Step Remote Control Code Learning . 4 User-Programmable Long-Term Silent Arm/Disarm . 5 User-Programmable Ignition-Controlled Door Lock/Unlock . [. . . ] If the ignition key is "ON, " the doors will lock. Press the remote ARM/DISARM button for 1-2 seconds. The siren will shut off and the parking lights will stop flashing. Interior Light Illumination When the alarm system is remotely disarmed, the vehicle interior light(s) will turn on for 30 seconds or until the ignition key is turned on. User-Programmable Passive Door Lock The system will not automatically lock the doors when the alarm passively arms to prevent the keys and remote from being locked in the vehicle. If you prefer, you can easily program the alarm to automatically lock the doors every time the alarm passively arms. (See the "Programming Table for System Features" on page 11. ) 5 Phoenix2 Rev. A - Owner's Manual 0399 User-Programmable Ignition-Controlled Door Lock/Unlock For the ultimate in security and convenience, the system is programmed to automatically lock your doors when the ignition key is turned "ON" or the engine is started, and will unlock when the ignition key is turned "OFF. " This feature can be programmed ON or OFF. (See the "Programming Table for System Features" on page 11. ) Protected Valet Mode You should place your system in Protected Valet Mode whenever your vehicle is being serviced by mechanics, car wash personnel or driven by valet parking attendants. While in the Protected Valet Mode, all alarm functions are bypassed to prevent unauthorized or accidental operation. Remote-controlled door lock/unlock , trunk release and all optional accessories will still operate. To Turn On Protected Valet Mode 1. Turn your ignition key to the "ON" position or start the engine. Flick the valet switch to the "ON" position. The LED will turn on solid red to indicate the system is in Protected Valet Mode. Turn your ignition key to the "OFF" position. Turn your ignition key to the "ON" position or start the engine. Flick the valet switch to the "OFF" position. The LED will turn off to indicate the system is no longer in Protected Valet Mode. Turn your ignition key to the "OFF" position Remote-Controlled Valet For your convenience, the system can be put into Valet mode via the remote control. While in Remote-Controlled Valet, all alarm functions are bypassed. To Activate Remote-Controlled Valet 1. Press the remote ARM/DISARM and SILENT buttons at the same time. The LED will turn on solid red to indicate the alarm is now in Remote-Controlled Valet. 6 Phoenix2 Rev. A - Owner's Manual 0399 To Deactivate Remote-Controlled Valet 1. [. . . ] NOTE: Stop when you reach the number of chirps associated with your chosen feature. Follow the "Secondary Action. " You will hear a number of chirps to confirm that you have changed the setting of that feature. Turn the ignition key to the "OFF" position. Repeat steps 1-7 for any other feature you wish to program. 10 Phoenix2 Rev. [. . . ]