User manual AXIS 210

[. . . ] AXIS 210/210A/211/211A Network Cameras User's Manual About this Document This manual is intended for administrators and users of the AXIS 210/210A/211/211A Network Camera and applies to firmware release 4. 30. It includes instructions for using and managing the AXIS 210/210A/211/211A on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. [. . . ] If this occurs, an entry will be created in the unit's log file. 35 Continue image upload (unbuffered) - enables the upload of video images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if uploading via a slow connection. Scheduled Event A Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays. Click Add scheduled on the Event types page. Enter a descriptive name for the event, e. g. Set the Activation Time parameters (24h clock) when the event will be active, e. g. start on Sundays at 13. 00 with a duration of 12 hours. set what the camera will do at the specified time, e. g. send uploaded images to an e-mail address. Click OK to save the Event in the Event Types list. Please see the online help for descriptions of each available option. 36 AXIS 210/210A/211/211A - Event Configuration Motion Detection Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of 10 Include and/or Exclude windows can be configured. · Included windows target specific areas within the whole video image · Excluded windows define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored) Once configured, the motion detection windows will appear in the list of available triggers, for triggering events. See "How to set up a triggered event" on page 34. Note: Using the motion detection feature may decrease the camera's overall performance. Configuring Motion Detection 1. Click Motion Detection in the Event Configuration menu. Click the Configure Included Window radio button. Enter a descriptive name under Window name. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired position). Adjust the Object size, History and Sensitivity profile sliders (see table below for details). [. . . ] Analog signal converted directly to a digital. Ping - A small utility used for sending data packets to network resources to check that they are working and that the network is intact. Pre/post alarm image - The images from immediately before and after an alarm. Protocol - A special set of rules governing how two entities will communicate. [. . . ]