User manual AXIS 25281R1

[. . . ] AXIS 70U/7000 User's Guide 1 AXIS 70U/7000 Network Document Servers User's Guide 2 AXIS 70U/7000 User's Guide About This Document This guide applies to the AXIS 70U and AXIS 7000 Network Document Servers with software release 1. 06 (AXIS 70U) and 2. 46 (AXIS 7000) and subsequent releases until otherwise notified. The document provides introductory information as well as instructions on how to set up and manage the AXIS 70U/7000. It is intended for anyone involved in installing and using the AXIS 70U/7000. For more detailed instructions, refer to applicable parts of the AXIS 70U/7000 User's Manual that is available from the Axis Web site. [. . . ] To change the value, repeat steps 4 - 6 above. Press Menu to display the subnet mask setting: Net mask: 000. 000. 000. 000 11. Press Select to edit the subnet mask: Edit net mask: 000. 000. 000. 000 12. To change the value, repeat steps 4 - 6 above. The node address should be equal the AXIS 70U/7000 serial number found on the underside label of the unit. Press Menu once more to display the final instructions: Press if you are finished 15. Press Select to exit the network settings. The AXIS 70U/7000 then completes the startup sequence. Write the name or IP address of the AXIS 70U/7000 on the supplied instructions label and attach it to the top cover. The unit is ready for use when the Status indicator stops flashing and remains lit. Note: If you make a mistake when editing the parameters, press the Cancel button to cancel the previous operation. AXIS 70U/7000 User's Guide Basic Installation 13 Verifying the Network Settings Access the Advanced menu from the AXIS 70U/7000 control panel to verify that your chosen network settings are correct, as described below: 1. To access the Advanced menu, press and hold down Menu simultaneously. Use to find the Network Settings option. to scroll through and check the parameter settings. and Select Verifying the Installation Upon successful installation, the AXIS 70U/7000 will identify the attached scanning device and display its name. If the connected scanning device is not supported, an error message will be displayed. If no destinations have previously been specified, the AXIS 70U/7000 displays: Add destinations If one or more destinations have already been specified, the AXIS 70U/7000 will display (xxxxxx is the first Destination Name): Send to: xxxxxx Note: · · The Destination Name is the text that appears in the destination list on the message display. Destinations are sorted in alphabetical order. 14 Basic Installation AXIS 70U/7000 User's Guide Using a Browser to Verify the Installation To verify the installation, access the AXIS 70U/7000 using a standard Web browser, as described below: 1. Place a document in the scanning device. Enter the name or IP address of your AXIS 70U/7000 in the location/address field. Example: http://192. 168. 0. 90 The AXIS 70U/7000 home page is displayed. 4. Enter username and password (by default set to root and pass respectively). Depending on the image format specified by the profile, the Web browser will display the image in an associated image viewer, or ask you to save the file. AXIS 70U/7000 User's Guide Configuring the AXIS 70U/7000 15 Configuring the AXIS 70U/7000 This section is targeted specifically to users responsible for the administration of the AXIS 70U/7000. [. . . ] Repeat the procedure until all your pages are scanned. Press Send to transmit the image to the selected destination. During the scanning this message is displayed: Scanning #1 please wait 5. When you have pressed Send and the transfer of the scanned image is completed, the AXIS 70U/7000 is released for other users. Note: The AXIS 70U/7000 keeps all temporary settings in memory for one minute after the last scanning job or until user has logged out, and then returns to its default settings. Adding E-mail Destinations The e-mail list resident within the AXIS 70U/7000 is initially created by your administrator. [. . . ]