User manual AXIS 25896R3

[. . . ] AXIS 213 PTZ Network Camera User's Manual About This Document This manual is intended for administrators and users of the AXIS 213 PTZ Network Camera, and is applicable for software release 4. 30. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems would also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required. Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548. Liability Every care has been taken in the preparation of this manual; Please inform your local Axis office of any inaccuracies or omissions. [. . . ] Click Add triggered on the Event types page. Enter a descriptive name for the event, e. g. Set the Priority - High, Normal or Low (see online help files). parameters when the event is to be active, e. g. Select the trigger alternative from the Triggered by. . . an Input port with a connected sensor if the door is opened. set what the AXIS 213 is to do if the main door is opened e. g. upload images to an FTP server or send an e-mail. Click OK to save the Event in the Event Types list. Please use the online help for descriptions of each available option. Image file names can be formatted according to specific requirements, such as time/date or type of triggered event. See File Naming & Date/Time Formats under Event Configuration. 38 AXIS 213 - Event Configuration Please use the online help files for descriptions of each available option. Pre-trigger and Post-trigger buffers This function is very useful when checking to see what happened immediately before and after a trigger, e. g. 2 minutes before and after a door has been opened. Check the Upload images checkbox under Event Types > Add Triggered. . . to expand the web page with the available options. The maximum length of time of the pre-/post-buffer depends on the image size and selected frame rate. Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the trigger. Check the box to enable the pre-trigger buffer, enter the desired length of time and specify the required image frequency. Include post-trigger buffer - contains images from the time immediately after the trigger. Note: If the pre- or post-buffer is too large for the internal memory, the frame rate will be reduced and individual images may be missing. If this occurs, an entry will be created in the unit's log file. Continue image upload (unbuffered) - enable the upload of images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. [. . . ] NTSC is the standard format used for televisions in most of North and Central America, and Japan. PAL is the standard format used for televisions in most of the world (other than the US, Canada, and Japan). Analog signal converted directly to a digital. Ping - A small utility used for sending data packets to network resources to check that they are working and that the network is intact. [. . . ]