User manual AXIS 27323R1

[. . . ] Monitor settings can also be accessed from the Device menu, which includes resolution, frame rate and compression. 2 AXIS Installation Monitor - User's Manual See also: Main menu Device menu Monitor window The Monitor window is the camera's live view. Scale-to-fit will rescale the camera image to fit the display. Show Actual Size will display the view in the original size. If the image resolution is larger than the display's, the center of the view is shown. [. . . ] See also: Main window Device menu Devices menu Add Device - A dialog opens to enter IP Address, HTTP Port, User name and Password of a new device. There is also an option to use Master Credentials when contacting the device. Tap on Add to include the network camera in the device list. Enter Credentials - By default, Use Master Credentials is enabled to access devices. If the user name and password in the device are different than the Master Credentials, enter the network camera's credentials here and uncheck Use Master Credentials. Properties - Lists the device's properties such as Name, IP Address, Port used, etc. See the network camera's user's manual for more information on what these properties entail. I/O - Opens a split window with Outputs listed at the top and Inputs listed at the bottom. You can verify outputs by tapping Activate and Deactivate. In the Input list you can also see if they are active or inactive. This option is enabled only if the network camera has I/O capabilities. Monitor Settings - Settings used when viewing a device. Default means the camera's internal settings are used. · Resolution - Select the resolution to use for the image. 4 AXIS Installation Monitor - User's Manual · Rotation - Rotates the camera view. Options are dependent on the camera model. · Frame Rate - Enter frames per second to view images from camera. · Compression - A higher value will give lower quality images and a lower value will give better images as there is less compression. · Channel - Video server channel. Open Monitor - Opens monitor to view camera image. The monitor window can also be opened by double-tapping on the listed device. Refresh Selected - Refreshes only the selected device. This can also be accomplished by pressing the center Pocket PC's hard key. See also: Main window Main menu The Monitor menu Close - Closes the Monitor window. Image - Set the video scale of monitor. · Scale-To-Fit - Displays the whole network camera's view inside the window. The camera view may be resized to fit. · Actual Size - Displays the network camera's view at its actual size. [. . . ] Consult your Pocket PC's user's manual and System Administrator. See also: Single camera setup Tips and tricks · Make sure the network is configured properly. · Use Internet Explorer on your Pocket PC to verify that the cameras can be reached. Assign a static IP address that matches your network or AutoIP address). [. . . ]