User manual AXIS CAMERA STATION 1.2

[. . . ] AXIS Camera Station User's Manual AXIS Camera Station User's Manual 1 Regulatory Information About This Document This manual is intended for administrators and operators of AXIS Camera Station and is applicable for software version 1. 20. Later versions of the document will be posted to the Axis Web site, as required. Previous experience of networking will be of use to the reader when installing and using this product. Legal Considerations Camera surveillance may be prohibited by laws that vary from country to country. [. . . ] the Internet) specify the WAN IP address. Otherwise enter the LAN IP address of the PC. Enable Web server Enables the AXIS Camera Station Web service and makes it possible to view live images and recorded events from an Intranet or the Internet. The installation of the web interface will start when OK is clicked if this option is enabled. For information on setting up the web service, see AXIS Camera Station Web, on page 64. Selecting this option makes the server create a checksum for all recorded events. If recorded images are tampered with, i. e. images are changed or deleted, a warning is given when the recorded event is played back. AXIS Camera Station User's Manual Enable File Control Check (watermark) 38 AXIS Camera Station Administration Note that once this option is enabled, it will only be possible to play those images that have been watermarked, i. e. images that are not watermarked cannot be played. Allow clients to update configuration Enable this if client users should be allowed to modify the current configuration from AXIS Camera Station Client. See AXIS Camera Station Client, on page 58 for more information. This setting allows you to view recordings as one large image in the playback window. If No is selected, the playback window will show the current frame in the center of the window with the four preceding frames above it and the next four frames below it. Specify the path to and name of the sound file (WAV) to play on alarms. Or click the search button to go Program Files | Axis Communications | AXIS Camera Station | Sound to select a new sound file for your alarms. Check this option if you want to enable the use of a proxy server. If you have cameras outside your local network and a proxy server is used for external network access, you must enable this setting. Click to use the same proxy settings as Internet Explorer. Show only one image on playback Sound on alarm Enable proxy server Get settings from Internet Explorer Proxy server Enter the IP address or name of the proxy server, and port if applicable, e. g. Note that you cannot use an address to a script. Enter the user and password as defined for your proxy server. Check this option if you want the browser to the contact servers directly when accessing local addresses. User/Password Bypass proxy server for local addresses AXIS Camera Station User's Manual 39 AXIS Camera Station Administration External I/Os This section defines alarms coming from devices connected to I/Os in the system. External I/O alarms can be used by in two ways: · · Alarms received directly from inputs/outputs on an Axis camera or video server. [. . . ] · The camera has the latest firmware installed. If AXIS Camera Station doesn't detect motion or doesn't record, please check the following: · The background service is started: File | Administration | Start Server. · You have enough disk space available (minimum 2 Gb per camera). When a monitor is selected from the Main window, it freezes after a few minutes. [. . . ]