User manual B-52 AT100

[. . . ] 3383 Gage Avenue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4384 Internet: www. B-52GUITAR. com E-mail: info@B-52PRO. com 8 E. T. I. Sound Systems is dedicated to product excellence and therefore continuously attempts to improve each and every model we manufacture. This ongoing process includes refinements in design, materials and workmanship, which may result in products that differ than those described in our literature. All features, specifications, and prices are therefore subject to change without notice. B-52 PROFESSIONAL IMPORTANT SAFETY INSTRUCTIONS! 1) 2) 3) 4) 5) 6) 6) 7) 8) 9) Read these instructions. [. . . ] CLEAN CHANNEL - MIDDLE: Adjusts the amount of mid-range frequencies as desired in the clean channel. Turning the middle control clockwise will increase the amount of warmth in your tone. Counterclockwise settings create a more pristine, acoustic kind of sound. 5. 4 26. EFFECTS - SEND JACK: Connects to the AT-100 to the input off an effects unit. EFFECTS ­ SEND LEVEL: Controls the sending level output to an effects unit. EFFECTS ­ RETURN LEVEL: Controls the input capacity of the returning signal from an effects unit. EFFECTS ­ RETURN JACK: Connects the AT-100 to the output of an effects unit. FOOTSWITCH ­ GAIN AND CHANNEL SWITCH: Switch 31. 34. between Gain 1 and Gain 2 in the overdrive Channel. Also switches between clean and overdrive channel. FOOTSWITCH - EFFECTS/REVERB: Connects footswitch to turn the reverb on/off and the effects loop on/off. LINE OUT JACK: Connects the AT-100 to an external linelevel device such as a mixing board. LINE OUT LEVEL CONTROL: Controls the output capacity of the Line Out Level. IMPEDANCE SELECTOR SWITCH: Allows the AT-100 to safely 11. CLEAN CHANNEL - BASS: Adjusts the amount of low frequency boost or cut as desired. Adding bass will increase the depth and fullness of your sound. CHANNEL SELECT: Push switch selects between the clean and overdrive channels. Activated LED lights indicate which channel is in use. OVERDRIVE ­ VOLUME 2: Controls the overall volume of the high gain overdrive channel. OVERDRIVE ­ VOLUME 1: Controls the overall volume of the medium gain overdrive channel. OVERDRIVE CHANNEL ­ GAIN SWITCH 2: Activates the CONTOUR control for Gain 2. OVERDRIVE CHANNEL ­ CONTOUR: Varies the critical midrange tone in the overdrive channels. [. . . ] If you are uncertain which component is defective, or need directions for removing a component, please contact our Customer Service Department for assistance. Components which are a part of an original B-52 speaker box must be sent directly to E. T. I. Products must be shipped in the original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Return Authorization Number must appear in large print directly below the shipping address. [. . . ]