Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual B-52 AT112. We hope that this B-52 AT112 user guide will be useful to you.
Lastmanuals help download the user guide B-52 AT112.
Detailed instructions for use are in the User's Guide.
[. . . ] IMPORTANT SAFETY INSTRUCTIONS!
1) 2) 3) 4) 5) 6) Read these instructions. DO NOT turn on the AT-112 without the loudspeaker connected. Be extra cautious when moving the AT-112 during rain or while transporting it over wet surfaces as water might splash onto the amplifier. Do not block any ventilation openings and operate in accordance with manufacturer's instructions. [. . . ] AC INLET & PRIMARY FUSE: Connects AC powercord and houses primary fuse. Always use correct value as indicated on amp panel chart. POWER TUBE FUSE: This fuse protects the AT-112 against circuit damage caused by a power tube failure. Only replace with a 1 AMP Fast Blo (never Slo Blo) fuse. LOUDSPEAKER OUTPUTS: Connects the AT-112 to the internal 12" speaker. The extension output can be connected to
an additional speaker enclosure. Be sure the impedance switch is properly set. The correct setting for the AT-112 is 8 ohms when no extension speaker is connected. NOTE: Always be sure the
speakers are plugged in before attempting to operate the amplifier. Severe damage can occur from failing to connect the speakers to a tube amplifier.
21. IMPEDANCE SELECTOR SWITCH: Allows the AT-112 to safely operate into any 4 ohm, 8 ohm or 16 ohms. NOTE: Proper setting of the switch is critical for reliable operation.
4
AT-112 CONTROLS AND FEATURES
10. CLEAN CHANNEL - MIDDLE: Adjusts the amount of midrange frequencies as desired in the clean channel. Turning the middle control clockwise will increase the amount of warmth in your tone. Counterclockwise settings create a more pristine, acoustic kind of sound. CLEAN CHANNEL - TREBLE: Adjusts the amount of high frequency boost or cut as desired in the clean channel. Turning this control clockwise will add brilliance to your sound. Turning the control counter-clockwise softens the tone. CLEAN CHANNEL - VOLUME: Controls the overall loudness of the clean channel. MASTER LOW RESONANCE: Controls the overall resonance of the amplifier. Turning the control clockwise adds rich low end. MASTER REVERB CONTROL: Adjusts the amount of reverb produced by the amplifier. [. . . ] Components which are a part of an original B-52 speaker box must be sent directly to E. T. I. Products must be shipped in the original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Return Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE B-52 AT112
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual B-52 AT112 will begin.
