User manual BABYLISS ST17E

[. . . ] ⷠSeparate your hair into sections. Clip the upper layers to the top or your head to work with the layers underneath. [. . . ] Clip the upper layers to the top or your head to work with the layers underneath. When using the unit for the first time, you might notice a little smoke and a distinct odour: this is common and will disappear in the following use. You will also notice that the unit sputters slightly, this sound is normal for a high output ion generator. Generally, it is recommended that you select a lower temperature for hair that is fine, bleached and/or damaged, and a higher temperature for hair that is curly, thick and/or difficult to style. Because every hair type is different, we recommend using position 1 the first time. For following uses, you can slowly increase the temperature if necessary. Every time you use the straightener, there might be a little smoke. This could result from evaporating sebum or the remnants of hair products (leave-in hair care, spray, etc. Set the style with a light mist of hairspray or a small amount of mousse, but do not brush your hair. To shape your hair The BaByliss 230 elegance straightener can also be used to accent certain sections of hair (to straighten the fringe or create a tousled look, etc. ) · To style your hair with the ends curling under, follow the above instructions but turn the appliance inwards (as you would with a brush when blow-drying). Hold in place for a few seconds, then release. [. . . ] ) · To style your hair with the ends curling under, follow the above instructions but turn the appliance inwards (as you would with a brush when blow-drying). Hold in place for a few seconds, then release. [. . . ]