User manual BABYMOOV TULIPE

[. . . ] € Never use the bottle warmer in damp surroundings and do not place directly under the tap. Never immerse the appliance in water or any other liquid. € Never leave the appliance close to any source of heat such as radiators, sunny windows, etc. € Always use the bottle warmer on a completely flat and dry surface, out of the reach of children. [. . . ] WARNINGS • The quantities given in the table are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. : the material and the thickness of the bottle and the presence of a detachable base are elements that can affect the bottle’s temperature. € ATTENTION: to elliminate the risk of burns, always check the temperature of the food before giving it to your baby. For a bottle, shake it well to mix the milk. Pour a drop onto the inside of your wrist to check its temperature. For a jar, mix the contents and try it in order to check it is not too hot. € If the power supply cable gets damaged it must be replaced by the manufacturer, the after-sales service or people with similar qualifications, in order to avoid any risk of danger. € This appliance is not intended for use by persons (including children) with impaired physical, mental, or sensory abilities, or by persons lacking in experience or knowledge, unless the person responsible for their safety has supervised and instructed them in the use of this appliance. € Chlidren should be supervised to ensure that they do not play with the appliance. HOW TO USE a - Graduated measure b - Tank c - Adaptor ring d - "On" switch e - Basket for jars f - Indicator lamp Points to respect for trouble-free use: - Always check that the bottle is slightly open. - Optimum heating will be guaranteed provided operation is not interrupted. - Use tap water only, with no added product. NB: always use the large basket to heat bottles and jars 6 STEAM BABY BOTTLE WARMER • Instruction Manual By using the amounts of water indicated in the tables below, a baby bottle or jar will be heated to 30°/33°C. The quantities given are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. Take care: the quantities of water given correspond to a polycarbonate bottle without a removable base. Fill the bottle warmer measure (a) with water up to the mark indicated. Pour the water into the bottle warmer tank (b). Put the bottle in the bottle warmer tank (b). If the bottle is too large, remove the adaptor ring (c). Put the jar in its basket (e) then put the basket in the bottle warmer tank (b). Press the "On" button (d) to start the appliance. The lamp (f) will turn red to show that the appliance is working. [. . . ] - Adaptor ring, measure and baskets for jars can be washed in the dishwasher. De-scaling: Do not use any de-scaling products. Depending on the quality of water used and after a certain period of time, a layer of scale may build up in the tank (b). In order for the sterilizer to work properly, the tank needs to be de-scaled regularly. [. . . ]