User manual BALANCE KH 1803 HAIRDRYER

[. . . ] Unplug the hair dryer from the power socket if defective operation is apparent and before cleaning it. To disconnect, pull only on the plug itself, not on the cable. Do not wrap the power cable around the hair dryer and protect the cable from damage. Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. [. . . ] Do not cover the ventilation grill when using the appliance. The hair dryer becomes hot when it is in use. Hold it only by the grip when it is hot. This hair dryer is intended only for the drying and shaping of human hair, under no circumstances is it to be used for wigs and hairpieces made of synthetic material. This hair dryer is intended for domestic use only. Pay heed to all of the information in this operating manual, especially the safety instructions. Blower levels 0 The hair dryer is switched off I reduced air flow II maximum air flow Heat levels · Lower heat level · Maximum heat level With the cool level switch "Cool-Shot" y you can produce a cooler air flow with every combination of blower and heat levels. After use, switch the appliance off by moving the blower switch r into the position "0". Then remove the plug from the wall socket. Q Styling jet w Air suction grill e Heat level switch (3 levels) r Blower level switch (2 levels) t Suspension eye y Cool level switch ("Cool-Shot") u Finger Diffusor To quickly dry hair, we recommend first of all Using a high blower and heater setting for a short period. afterwards , place the settings at a lower level to shape and form the hair. With the enclosed styling jet q, which can be turned to all positions, you can studiously use the air flow for styling. If you wish to dry your hair particulary gently, or for the so-called "air-dryed permanent wave", use the finger diffusor u. For this, first of all remove the styling jet q, then replace it with the finger diffusor. Before you comb your hair out allow it to cool, so that the styling retains its form. For cooling the hair you can use the switch "Cool-Shot" y or level · First pack and transport the hair dryer when it has completely cooled down. Switch the hair dryer on with the blower level switch r. The hair dryer is fitted with two function switches. With these you can separately select the strength of the air flow ( Blower switch r) and the level of heat (Heat level switch e): Danger of electrical shock ALWAYS remove the plug from the power socket before cleaning the hair dryer. Cleaning the housing To clean the housing, use a soft cloth moistened with a mild soapy solution. cleaning the air suction grill Risk of Fire!Clean the air suction grill w at regular intervals with a soft brush. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]