User manual BALAY 3ET719F

[. . . ] Table of contents Important information . Familiarising yourself with the appliance . 5 5 5 7 9 9 10 11 Main switch with childproof lock . 17 A hotplate is to switch off automatically . [. . . ] Switch down to a lower heat setting in good time. Cooking with small quantities of water Lowering the heat setting 16 Timer function This function can be used in two different ways: - a hotplate is to switch off automatically - as an alarm clock A hotplate is to switch off automatically Setting procedure All hotplates dispose of this function. You enter a specific cooking time for the desired hotplate. When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. Touch the - and + symbols of the timer function at the same time. The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the - and + symbols of the timer function repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. Touch the - or + symbol. The default value appears. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. The cooking time flashes for several seconds and then disappears. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. 17 When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. A 0 appears in the heat setting indicator. 00 flashes in the timer indicator and the 1 indicator flashes. Touch the - and + switches of the Timer functions at the same time. You should do this several times until the 1 symbol flashes. Now you will be able to set the time with the - or + switches. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Set the timer function to 00 using the - symbol. The indicator goes out after a few seconds. If you would like to call up the remaining cooking time for a hotplate: Touch the - and + symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. [. . . ] If E Ö and numbers appear in the display panels, there is a fault in the electronics. Disconnect the appliance from the mains and reconnect it. Consult the after sales service if the display appears again. If F and a number flash alternately in the display, your appliance is indicating a fault. [. . . ]