User manual BALAY 3HT618XP

[. . . ] Table of contents Important information . Oven carriage and shelving accessories . 5 5 6 6 7 7 8 8 9 9 9 11 12 Before using for the first time . If the oven is to switch off automatically . [. . . ] = Bottom heating Setting procedure Firstly, set the type of heating, temperature and, if necessary, the cooking time for the oven. The ] symbol lights up in the display. The rapid heating process is complete You will hear a short signal. Put your dish in the oven. Time When the oven is first connected, or following a power cut, the j symbol and three zeros flash in the display. The function selector must be switched off. Setting procedure Example: 13:00 1. Press the j clock button. 12. 00 appears in the display and the j symbol flashes. 17 2. Set the time using the + or - button. The time selected is adopted after a few seconds. Changing the time e. g. from summer to winter time Hiding the time Press the j clock button twice and change the time with the + or - button. It will then only be visible when you are performing settings. To do this, you must change the basic setting. See the Basic settings" section. Timer You can use the timer as a kitchen timer. This means that you can tell whether the set timer period has elapsed or the cooking time is complete. You can also set the timer if the childproof lock is active. Setting procedure Example: 20 minutes 1. Press the j clock button. The timer symbol a will flash. 18 2. Set the timer period using the + or button. + button default value = 10 minutes. The time counts down visibly. The time has elapsed Changing the timer period Cancelling the setting The timer and cooking time count down simultaneously A signal sounds. Press the button until the display is at zero. The timer period counts down visibly in the display. To call up the remaining cooking time ?, end time !or time j: Press the j clock button until the symbol in question flashes. The value called up will then appear in the display for a few seconds. 19 Basic settings Your oven has several basic settings. You may change the basic settings for the time, the duration of the signal and the reset time for a setting. Basic setting Time j 1 = Time in the foreground Signal duration a 2 = approx. [. . . ] The after sales service centres listed will also be happy to advise you of a service point in your local area. E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after sales service. The rating plate containing these numbers is found on the right, on the side of the oven door. You can make a note of these numbers in the space below to save time in the event of your appliance malfunctioning. [. . . ]