User manual BALAY 3SC185B

[. . . ] You have opted for a tumble dryer manufactured by Balay. Please take a few minutes to read and become familiar with the advantages of your tumble dryer. To meet the high quality demands required by Balay, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www. [. . . ] When the dryer is delivered from the factory, the hose for discharging the condensation into the condensation container is fastened to the connecting piece. Detach the condensation hose from the socket. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked. Secure the drain hose so that it cannot slip out. 80 cm between the installation surface and the drain is maintained for drainage into a siphon. The condensation water is now discharged via the drain hose into the waste-water system or into a washbasin. Note: If you want to drain the condensation water back into the condensation container, reverse these steps. Select a program and, if necessary, adjust the program default settings. ( Condensate container 0 Control and display panel 8 Drum interior light (depending on the model) @ Dryer door H Air inlet P Fluff filter X Heat exchanger Getting to know your appliance en ( Use the program selector to switch the dryer on and off and to select 8 Start button for starting or interrupting the program ~ Page 24. For a detailed description of all buttons, see ~ Page 24 onwards. Program delay in hours when "Ready in" time is selected. Expected program duration in hours and minutes. Remove any cigarette lighters and matches from pockets. The dryer drum and fabrics may be damaged. Remove all objects from pockets and observe the following information: Tie cloth belts, apron strings, etc. Remove any metal objects, such as paper clips, from pockets. to ensure a consistent drying result , sort laundry by fabric type and drying programme. Always dry very small items of laundry, e. Knitted fabrics such as T-shirts and jerseys often shrink the first time they are tumble-dried. [. . . ] Drying has been interrupted as a result of a power cut, because the condensate container is full or because the maximum drying time has been exceeded. en Faults and what to do about them The fluff filter may be dirty and cause a longer drying time. The heat exchanger may be dirty and cause a longer drying time. If the air inlet on the dryer is blocked or not freely accessible, this may increase the drying time. [. . . ]