User manual BARTSCHER 1043413

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The refrigerated display case is intended only for cooling food products and beverages. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Place the device in such a manner that there is a minimum of 10 cm between it and other objects, including walls, in order to ensure proper air circulation. Do not place the device where humidity or temperature are high as the device may be damaged. Before the first use the unit should stand for at least 2 hours before it is connected to the power source. Do not drill holes in the device nor mount other objects to it. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Prior to first use, wash the interior and exterior of the unit with a soft, moist cloth and mild cleaning agent. Connect the unit to a grounded single outlet. Close the night blind and allow the unit to reach the desired temperature before placing food products or beverages inside. The temperature regulator is located at the front of the unit, on the left side. [. . . ] Therefore, you must not use any kind of pressure water jet for cleaning the device!O Wash the adjustable grids and lower shelf with a soft cloth and mild cleaning agent. O Never use harsh cleaning substances such as scouring power, alcohol, solvents or other such substances that may damage the unit's surface. O Use only soft cloths, never use harsh cleaners that may scratch the unit's surface. [. . . ]