User manual BARTSCHER 105835

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Fill the shaker with the desired ingredients. While filling the shaker, ensure that the maximum filling volume is not exceeded (higher mark, approx. The shaker must not be underfilled, as the mixing tip may not reach the ingredients. Ensure that the upper edge is properly attached to the shaker clamp, as this is the only way to ensure contact between the shaker and micro switch. Use only the shaker supplied with the unit! If the mixing tip is properly attached to the shaker clamp, the bar mixer can be turned on by using the switch. First, turn the switch to speed , , I" (slow), then to speed , , II" (fast). Never insert hands, spoons or any other objects into the shaker when the unit is turned on! [. . . ] the bar mixer is not intended for grinding ice. When making drinks, use crushed ice when ice is necessary. O Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug!O Do not use any acid agents and make sure no water ingresses the device. [. . . ]