User manual BARTSCHER 110131

[. . . ] The instruction manual forms part of the product and should be kept near the appliance and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. [. . . ] Hidden damages should be reclaimed immediately after detection, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. Observe the regulations applicable in your country when disposing of the packaging. In case any part is missing, please contact our customer service center immediately. Keep the package closed until installation and under consideration of the positioningand storage markings indicated on the outside. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months), make sure you check the state of the packaging and the parts regularly. Display screen Time display: current day and time Programmable automatic ON/OFF timer Digital display and reservoir temperature control Electronically controlled reservoir temperature using PID technology Automatic reservoir filling Automatic water pump disconnection when water level reaches low levels Visual indicator displays when water level in reservoir is too low Automatic disconnection of heating device when water level is too low Self-cleaning brewing assemblies Choice of four different programs controlling coffee portions Visual indicator displays regeneration phase in water decalcifying device Choice of language (Spanish, English, German, French, Italian) The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. It is also equipped with a protective mechanism to prevent sudden stops in water flow: 1. Turn the steam regulator until steam begins to come out (see (3) fig. Place the strainer in the left side of the brewing assembly, then turn to the right until it settles into place. Insert the filter basket and fill it with the desired amount of coffee. Tightly pack the coffee using the beater. Place the full strainer in the brewing head until it settles into place (see fig. Put the coffee cup under the coffee spout and press the brewing button. Choose the proper function on the service panel (see fig. The first four buttons on the service area for each brewing assembly (1 x espresso ­ 1 x coffee ­ 2 x espresso ­ 2 x coffee) are automatic programmes. For best results, the device, brewing head and strainer must be constantly kept at the appropriate temperature. The strainer should be placed in the brewing head prior to preparing coffee. [. . . ] As stated above, this is only possible for changes made on the left service panel. If changes are set via other service panels, they will affect only the one button. New programmes should be set with fresh coffee in the filter basket. Turn off the device using the main on/off switch (see (8) fig. [. . . ]