User manual BARTSCHER 120.325

[. . . ] This symbol highlights tips and information, which have to be followed for an efficient and trouble-free operation of the device. All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. [. . . ] Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. Pressing lever Pressing bar Round inlet Safety cover bolt START/STOP button Safety close knob Adjustable legs Housing Outlet The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. do not let the cable dangle over the counter edge. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation. Never disconnect or remove any of the device's safety elements. The element is equipped with 2 safety elements (microswitches): safety close with microswitch, which halts the device's operation when the cutting blade safety cover is open. Microswitch by round inlet, which turns the device off if the pressing lever is up. Ensure the safety instructions and warnings placed on the vegetable cutter are always kept in readable condition and never remove them. The device, working area and surface around the vegetable cutter must always be kept dry and free from dust, vegetable cuttings and foreign bodies, so as to avoid the risk of slipping on a wet floor or piece of vegetable. [. . . ] With a cloth), then lift the blade up while grabbing under the blade and removing it. For work that requires the use of one cutting blade, mount only one rotating cutting blade on the plastic disc. For work that requires the use of two cutting blades, mount the blades in the following order: 1. After mounting the blades, ensure that the safety cover has been secured using the safety close! [. . . ]