User manual BARTSCHER 120.791

[. . . ] Keep this instruction manual ready to hand at the product!This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. [. . . ] Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation. Before installation the local power grid specification should be compared with that of the device (see type label). connect the device only in case of compliance!Discard the complete packing material after unpacking the device. Place the device on top of an even and safe surface which supports the weight of the device and is not heat sensitive. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. Make sure you position the device properly, so the ventilation openings at the back of the device are not covered or blocked. Do not place the device near walls or other objects made of combustible materials. Keep a minimum distance of 20 cm to between other objects and each side of the device. Do not place any objects or items on top of the device. The electrical circuit in the socket must be secured to at least 16A. Only connect the unit directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Clean the device before start-up inside and outside using a soft, damp cloth and a mild detergent. Clean the grill, the GN-containers and the water tank before operation using a mild detergent. Rinse with clear water and dry these parts thoroughly with a soft and dry cloth. place the filled water tank back in the device. Before first use, heat up the device without accessories for about 5 minutes on the highest temperature stage, in order to remove the manufacturing fats inside the device. open the glass door afterwards , so the remaining smoke can escape. Preheating is now no longer necessary before operation. [. . . ] As a result, the water runs into a water collector which is mounted underneath the device. O Remove the water collector underneath the device and empty it before cleaning. O Clean the grill, the GN-containers, the water tank, the water collector under running water with a soft cloth or sponge and a mild detergent. Rinse with clear water and dry all parts thoroughly afterwards. [. . . ]