User manual BARTSCHER 286602

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BARTSCHER 286602. We hope that this BARTSCHER 286602 user guide will be useful to you.

Lastmanuals help download the user guide BARTSCHER 286602.


Mode d'emploi BARTSCHER 286602
Download

You may also download the following manuals related to this product:

   BARTSCHER 286602 CONTROL PLAN (855 ko)

Manual abstract: user guide BARTSCHER 286602

Detailed instructions for use are in the User's Guide.

[. . . ] If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the washing machine. Check whether the washing machine has been damaged during transport. If this is the case, do not install it and contact your retailer. Remove the 2 protective screws and the rubber washer with the respective spacer, situated on the rear of the appliance (see figure). [. . . ] Special programme Daily 30' (programme 7 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts 30 minutes and allows you to save on both time and energy. By setting this programme (7 at 30°C), you can wash different fabrics together (except for woollen and silk items), with a maximum load of 4 kg. we recommend the use of liquid detergent. 18 Personalisations If, when the appliance is switched on, the KNOB is positioned appears. Press on a programme with a spin cycle, a fixed button and the maximum spin speed allowed for the programme set will be displayed, and the icon flashes. Press it again and the values lower until they reach OFF, which indicates that the spin cycle has been excluded (press it again to go back to the maximum value); stop on the desired speed, after approximately 2 seconds the setting is accepted: the remains fixed. The spin cycle setting is enabled with symbol all the programmes except for 9 and the Draining cycle. Setting the spin cycle GB Installation Option buttons Description If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature appears. Press button and the maximum temperature allowed for the needs to be regulated, a fixed programme set will be displayed and the icon flashes. Press it again and the temperature lowers until it reaches OFF, which indicates a cold wash cycle (press it again to go back to the maximum value); stop on the remains fixed. Desired value, after approximately 2 seconds the setting is accepted: the symbol The temperature adjustment is enabled with all wash programmes. Preparing your laundry  Unfold all garments completely before placing them inside the washing machine. • Divide your laundry according to: - the type of fabric/the symbol on the label. - the colours: separate coloured garments from whites. ╠Empty all pockets and check for loose buttons. 20 Precautions and advice  The washing machine was designed and built in compliance with the applicable international safety regulations. The following information is provided for your safety and should consequently be read carefully. The impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. GB Installation General safety • This appliance has been designed for nonprofessional, household use and its functions must not be changed. • This washing machine should only be used by adults and in accordance with the instructions provided in this manual. [. . . ] Before calling for Assistance (see page 24), make sure the problem can't easily be solved by consulting the following list. gB Installation Problem The washing machine won't start. Possible causes/Solution: • The appliance is not plugged into the socket, or not enough to make contact. The The START/CANCEL button has not been pressed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BARTSCHER 286602

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BARTSCHER 286602 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag