User manual BARTSCHER A135.006

[. . . ] This symbol highlights instructions, which should be followed to avoid any risk of damage, malfunctioning and/or breakdown of the device. This symbol highlights tips and information, which have to be followed for an efficient and trouble-free operation of the device. All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. [. . . ] Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. The operator is liable for all damages resulting from inappropriate use. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier's bill of delivery. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. supply re-usable packing materials to the recycling. Please inspect the device upon completeness. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: - In case of longer storage (> 3 months) make sure you Check the state of the packaging and the parts regularly. We reserve the right to make technical changes!The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. Do not let the cable dangle over the counter edge. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. [. . . ] They can get caught in the blade and lead to damage of the unit or injury to the person operating it!When the ingredients achieve the desired consistency, turn the dial to the position Marked "0" and remove the glass pitcher from the motor after it has shut off. The unit is equipped with a safety function which ensures that the unit can be activated only when the glass pitcher is properly mounted. When the glass pitcher is removed from the motor, the unit shuts off. [. . . ]