User manual BARTSCHER A153038

[. . . ] This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ] Using stand (vertical arrangement) Use sound bar stand cover (257 mm For model (10 - 21/16" )). hT-SL75 Use stand base (336 mm (13 - 7/32")). Use sound bar stand cover (155 mm For model (6 - 3/32")). Pull out the cover of sound bar stand as below. Cover Sound bar stand cover Suggestion of the sound bars and LCD TV arrangement. Slot in the sound bar into the sound bar stand and fix its cover as shown. (Model A153038 : for 60" (152 cm) and 70" (177 cm) TV) (Model HT-SL70 : for 52" (132 cm) TV) LEFT Slot in the wire inside the groove or slit for better wire arrangement. rIGHT LEFT (Model HT-SL70 : for 46" (117 cm) TV) 3. Slot in the sound bar to the base stand according to your TV size. (For model HT-SL70) (For model A153038) 46" (117 cm) TV 176 mm (6 - 15/16”) RIGHT 52" (132 cm) TV 60" (152 cm) TV 70" (177 cm) TV Groove to neatly arrange the wire in. 336 mm (13 - 7/32”) Groove to neatly arrange the wire in. Placing the stand Place the stand as shown. aCTIVE SUBWOOFER SYSTEM HT-SL70 BD Player DVD player SUBWOOFER SYSTEM Place the system as shown. Remove the protective film covering the sound bar and subwoofer before using the system. ACTIVE SUBWOOFER SYSTEM HT-SL70 ACTIVE SUBWOOFER HT-SL70 SYSTEM Stand System connections Make sure to unplug the AC power lead before making any connections. Subwoofer R Right Left L Sound Bar White Wall socket AC 220 - 240 V ~ 50 / 60 Hz ■ Red ● Do not make a mistake when Speaker connection Connect the wire without insulation tube to the minus (–) terminal, and the wire with red and white insulation tube to the plus (+) terminal. Caution: ● Use speaker with an impedance of 3 ohms or more, as lower impedance speaker can damage the unit. The right speaker is the one on the right side when you face the unit. — Do not let the bare speaker wires touch each other. — Do not allow any objects to fall INCORRECT into or to be placed in the bass reflex duct. — Do not stand or sit on the subwoofer/sound bar. E-7 1 2 3 4 5 6 7 1 9 2011 October 7 HT-SL70 System connections (continued) ■ Connecting to TV (with HDMI) Caution: ● Turn off all other equipment before making this connection. [. . . ] Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. — Is HDMI compliant If problem occurs during operation equipment being used? [. . . ]